User manual YAMAHA YDP-181

[. . . ] For information on assembling the keyboard stand, refer to the instructions at the end of this manual. IMPORTANT -- Check your power supply -- Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] External songs (commercially available songs or songs which have been edited on a computer) NOTE Only files which contain data will be displayed. NOTE The following types of songs cannot be deleted. If you try to delete the song, "Pro" (Protected) appears in the display. · Protected songs (extension: Cxx, Exx or SME) · Disklavier Piano Soft songs 2. Delete the file. After releasing the [FILE] button, "n y (no or yes)" appears in the display. If you want to delete the file, press the [+/YES] button. After "n-y" appears in the display again to confirm whether you wish to delete the file or not, press the [+/YES] button once more. If you do not want to delete the song, press the [­/NO] button. Notice While the instrument is accessing data (such as during Save, Delete, Load and Format operations) or is mounting the USB storage device (shortly after the connection: until the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT remove the media from the device, and do NOT turn the power off to either devices. Doing so may corrupt the data on either or both devices. NOTE For SMF songs (Sxx), the song numbers are fixed and not changed by deleting files. However, the song numbers of External songs are not fixed and may be changed by deleting External songs. 3. Exit from the file operation mode. Press the [FILE] button to exit the file operation mode. (The FILE indicators turn off. ) 36 Owner's Manual Handling Songs with a USB Storage Device Formatting the USB Storage Device Notice 13 12 Procedure 1. Engage the format mode. Press the [FILE] button. (The "DEL/ FORMAT" indicator lights. ) Then, while holding the [FILE] button, simultaneously press the [­/NO] and [+/YES] buttons. When "For" (Format) appears in the display, release the [FILE] button to display "n y" (no/yes). 2. Execute the format operation. After "n y" (no/yes) appears in the display, press the [+/YES] button. After "n-y" appears in the display again to confirm whether you wish to format the device or not, press the [+/YES] button once more. If you do not want to format the device, press the [­/NO] button. Notice While the instrument is accessing data (such as during Save, Delete, Load and Format operations) or is mounting the USB storage device (shortly after the connection: until the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT remove the media from the device, and do NOT turn the power off to either devices. Doing so may corrupt the data on either or both devices. 3. Exit from the format mode. Press the [FILE] button to exit the file operation mode. (The FILE indicators turn off. ) Owner's Manual 37 ENGLISH If data is already saved to the USB storage device, be careful not to format it. [. . . ] [Para usuarios de negocios en la Unión Europea] Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. (weee_eu) For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. [. . . ]