User manual YAMAHA YHT-185 INSTALLATION GUIDE

[. . . ] YHT-185 Digital Home Theater System En System Connection Guide © 2007 GARK All rights reserved. STEP 2: Connect other home theater components (optional) CAUTION Components must not be plugged in while connecting them. Wait until all connections are made before plugging in your components. 5 AUDIO R L VIDEO IN Printed in China WJ99940 Yamaha created this package to greatly enhance your audio and home theater enjoyment. [. . . ] The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (­) side attaches to the black terminal. CAUTION Receiver must not be plugged in while connecting speakers. Connect a video monitor Connect the MONITOR OUT jack of the receiver and the video input jack of your video monitor using an RCA video cable (not included). NX-E270 7 6 3 4 NX-E270 HTR-6030 SW-P270 5 HTR-6030 2 CD player HTR-6030 To the center speaker (5) Inspect contents After unpacking, inspect the contents to confirm you have the above items: NX-E270 two front speakers (1, 2), NX-E270 two surround speakers (3, 4), NX-C270 one center speaker (5), SW-P270 powered subwoofer (6), HTR-6030 AV Receiver (7) with remote control. Also included, but not shown, are five speaker wires, one subwoofer cable, AM and FM antennas, fasteners, non-skid pads, and three related Owner's Manuals. To the surround right speaker (3) To the surround left speaker (4) DVD player HTR-6030 Connect a CD player Connect CD jacks of the receiver and the output jacks of your CD player using RCA audio cables (not included). 2 1 2 5 3 6 1 Front right speaker 2 Front left speaker 3 Surround right speaker 4 Surround left speaker 5 Center speaker 6 Subwoofer Connect surround and center speakers Connect speaker wire for surround speakers (3, 4) and center speaker (5). The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (­) side attaches to the black terminal. CAUTION Receiver must not be plugged in while connecting speakers. Connect a DVD player (video) Connect the DVD VIDEO IN jack of the receiver and the video output jack of your DVD player using an RCA video cable (not included). 7 6 HTR-6030 3 MD/CD recorder HTR-6030 4 Connect an MD/CD recorder Place speakers Place speakers so they appear in the approximate positions as shown in the diagram above. See your Owner's Manual for more information on speaker placement and mounting. SW-P270 Connect MD/CD-R IN/OUT jacks of the receiver and the input/output jacks of your components using RCA audio cables (not included) as shown. Connect the subwoofer 8 HTR-6030 DVD player 3 70 mm Connect the subwoofer cable to the subwoofer (6). Set subwoofer VOLUME control to half-way mark and POWER to OFF (rear panel). CAUTION Components must not be plugged in while connecting them. STEP 3: Plug in Connect a DVD player (audio) Connect the DVD DIGITAL INPUT jack of the receiver and the digital output jack of your DVD player using a coaxial cable (not included). Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver first, then the subwoofer and other components. [. . . ] · Refer to your Owner's Manuals for each component in your system for more information. · You can simply operate the receiver by using the SCENE function (see page 4 in the Owner's Manual of HTR-6030). Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system. Connect a DSS/Cable/HDTV tuner box Connect the DTV/CBL jacks of the receiver and the output jacks of your set-top box using RCA audio/video cables (not included) as shown. [. . . ]