User manual YAMAHA YSP-1

[. . . ] G YSP-1 Digital Sound Projector Système Acoustique Numérique OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place with at least 5 cm of space above (or below) YSP-1 ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/ or cold. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] The front left and right sound beams are output towards the wall. Remote control 34 ADJUSTING BEAM MODE SETTINGS ST(STEREO)+3 beam mode Outputs sound beams to the front left and right, center, and surround left and right speaker positions. This mode is ideal when watching live recordings on DVD. Vocals and instrumental sounds can be heard close to the center of the listening position, while sound reflections from the venue itself can be heard to your right and left, giving you the feeling that you are sitting right in front of the stage. The front left and right sound beams are output directly at the listening position. Remote control BASIC OPERATION English 35 MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as make advanced settings for speaker positions, sound beams, digital input and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment. y Most of the parameters described in SOUND MENU are set automatically when you perform EASY SETUP (see page 24). Use SOUND MENU to make additional adjustments. SOUND MENU Item SUBWOOFER SET SPEAKER LEVEL DYNAMIC RANGE AUDIO SET TONE CONTROL Features Customizes the various subwoofer settings. Adjusts the output level of each speaker. Adjusts the dynamic range for Dolby Digital or DTS signals. Customizes the muting level and audio delay. Adjusts the output level of high-frequency or low-frequency sound. Page 38 38 39 39 39 BEAM MENU Use to manually adjust listening room parameters or alter the quality and tone of the sound output by this unit. Item PARAMETER BEAM ADJ ROOM EQ BEAM TONE IMAGE LOCATION MEMORY Features Customizes listening room and listening position settings. Adjusts the tonal quality of the listening room. Adjusts the output level of high-frequency or low-frequency sound for each speaker. Adjusts the position of the front left and right speakers. Saves and calls up setting contents. Page 40 41 42 42 43 43 INPUT MENU Use to reassign digital input/outputs and select the input mode. Item INPUT ASSIGNMENT INPUT MODE INPUT RENAME Features Assigns jacks according to the component to be used. Selects the initial input of the source. Renames the displayed input source. Page 44 44 44 OPTION MENU Use to adjust the optional system parameters. Item DISPLAY SET UNIT SET Features Adjusts the brightness of the display and OSD. Changes the display unit of measurement. Page 45 46 y BEAM MENU allows you to make surround sound effects settings normally available in the speaker settings menu. 36 MANUAL SETUP Using SET MENU Use the remote control to access and adjust each parameter. NIGHT SURROUND SET MENU 3 Press / to select a sub menu, then press SELECT. CH LEVEL MENU SELECT SELECT TEST RETURN VOLUME 4 y You can change SET MENU parameters while the unit is reproducing sound. Use / // each parameter. and SELECT to configure 1 Press SET MENU. The operation buttons for SET MENU are displayed at the bottom of the screen. SELECT SET MENU SET MENU . ;MEMORY ;EASY SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [SELECT]:Enter p p 5 To exit, press SET MENU when finished. SET MENU ADVANCED OPERATION 2 Press / to select MANUAL SETUP, then press SELECT. The following screen appears on your TV. The OSD disappears from your TV screen SELECT ;MANUAL SETUP . 1 SOUND MENU 2 BEAM MENU 3 INPUT MENU 4 OPTION MENU [ ]/[ ]:Up/Down [SELECT]:Enter p p English 37 MANUAL SETUP SOUND MENU Use to manually adjust any speaker setting or compensate for video signal processing delays. [. . . ] 24 T Test tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 L LFE 0. 1 channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 M MANUAL SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]