User manual YAMAHA YST-MS35D

[. . . ] UCA POWERED MULTIMEDIA SPEAKERS YST-MS35D OWNER'S MANUAL MODE D'EMPLOI · Explanation of Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORTANT!Please record the serial number of this unit in the space below. Model: Serial No. : The serial number is located on the rear of the unit. [. . . ] * The installation may take a longer time depending on the system environment. After the installation dialog box disappears, wait several minutes. Check that the USB driver has been installed successfully by following the procedure below. Click the Windows "Start" button and select "Settings", and then "Control Panel". Double-click the "System" icon. Click the "Device Manager" tab. Click the "View devices by type" option button. Click the "+" symbol next to "Sound, video and game controllers, " and make sure that "USB Audio Device" appears in the list, as shown. Note: · The device list on your computer may differ to that shown here. · If "!" or "?" is shown at the head of the device name, check the followings: * The USB cable is firmly connected. * The AC power cord of this unit is plugged into an AC outlet. · If the driver has not been successfully installed, disconnect the USB cable and connect it again. If installation still fails, restart Windows and try again. Click the "+" symbol next to "Human Interface Devices", and make sure that "HID-compliant consumer control device" and "USB Human Interface Device" appear in the list, as shown. * The screen image is for Windows 98SE. Click the "+" symbol next to "Universal Serial Bus controllers" and make sure that "USB Composite Device" appears in the list, as shown. * The screen image is for Windows 98SE. * When using Windows Me, "?" may be shown at the head of "USB Copmposite Device" in green. This means the USB driver has been installed with the Generic ID supplied with the operating system. (This is not an error message. ) E-4 Make the following settings on your computer after the installation of the driver is finished. English Setting of Audio and Audio CD [Windows 98/98SE only] · Terminate all the activated applications. · When using Windows 98SE, restart Windows, first. Click the Windows "Start" button and select "Settings", and then "Control Panel". Double-click the "Multimedia" icon. Click the "Audio" tab and select "USB Audio Device" at "Preferred device" of "Playback". [. . . ] Turn off the power to the speakers, remove the USB cable, then turn on the power to the speaker again. If the USB Driver is still not recognized, re-install it. Insert the AC adaptor firmly into the AC outlet. Plug the AC adaptor completely into the AC outlet and DC connector, then turn on the (standby/on) button. [. . . ]