User manual YANMAR 2GM

[. . . ] 32 Changing the display mode of the recording date . . . . . . . . 32 Changing the aspect ratio (wide/normal) of the edited video when it is saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Changing the number of sound bits when saving in AVI (DV-AVI) format or on a tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Preparation Starting up SweetMovieLife. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] [Standard] Effects that do not interfere with the original video are used. 4. Add a recording date. 2 [Comical] Effects that give a comic atmosphere to the video are used. 1 [Flash] Effects that give a lively atmosphere to the video are used. 3 · If you do not want to add a recording date, check that [Without date] is selected, and click [Next]. 1 Select [Add date]. · If the video does not have the recording date and time information, no recording date is added to the edited video even if you selected [Add date]. · If the date and time has been incorrectly set on the digital video camera during recording, the wrong date is added to the edited video. This software cannot change the date. [Slow] Effects that give an unhurried atmosphere to the video are used. 22 Editing video Edit setting 2 Check the display mode (order of Year/Month/Day etc. ). · Display mode can be changed on the [Setting] screen. You are now ready to perform auto edit and save the video. 3 23 Editing video Performing auto edit and saving the video 3 :Do you want to check the edited video before saving it?Tips While importing the video on a tape, the following screen appears. A B C D E A B A The edited video can be checked before saving. 4 · Select A to further edit the contents in MotionDV STUDIO. ( 35) B Save the edited video without checking it. A B C D E 6 A Saved location and file name are displayed while importing. B The video is displayed while importing. C The duration of the imported video is displayed. (Only when [Capture video from current position to end] or [Capture total video content after rewinding] is selected in the input setting. ) E Import is aborted, and the video imported up to this point is deleted. 26 Editing video Performing auto edit and saving the video 5-2 :Saving the video on a tape. 4 When the following message appears, insert a tape in the digital video camera, and then find the position where you want to start recording on the tape by operating the digital video camera. 2 · If two or more digital video cameras are connected, be sure to check that you have correctly selected the digital video camera. (If you accidentally select another digital video camera, the tape contents <recorded material> will be overwritten. ) 1 3 Notice If the digital video camera the video will be saved to is not connected, first connect it with a DV cable. (The USB cable cannot be used to save the video on a tape. ) Do not disconnect the digital video camera or remove the tape the video will be imported from before auto edit starts. The edited contents will become invalid. 2 Click the button to select the digital video camera which the video is saved to. 3 Click [Starts saving (Start Edit)]. · If you have selected not to check the edited video before saving, auto edit starts. 5 Click [Yes]. · Click [No] to stop saving. [. . . ] Now, the setting is complete. Frames drop during an import. Cannot select the video file to be edited. Files that are not on a hard disk (files in a floppy disk, CD-ROM, memory card etc. ) cannot be used for editing. 41 Useful information Troubleshooting Errors with editing Possible errors The setting content is no longer valid. When you edit video on a digital video camera, the setting contents will become invalid if you do any the following operations before the video is imported. - When the digital video camera is turned off. - When the digital video camera is disconnected. [. . . ]