User manual YANMAR 3GM PARTS CATALOG

[. . . ] The radome emits radio waves which can be harmful to the human body, particularly the eyes. Leave the equipment powered while underway. Distress cannot be communicated unless the equipment is powered. Do not disassemble or modify the equipment. [. . . ] Default print action: Normally, choose Print to screen which causes the file to be output via the Printout viewer. For an example, see "4. 6 Traffic Log Printout viewer". For direct printout, choose Print to default windows printer. Print to screen settings: Determines the output of records via the Printout viewer. Normally, use Concatenate print jobs which "chains" the jobs to be printed or saved to file. The alternative choice clears the screen after each printout. Printer settings: For hardcopy printout, make sure that the appropriate printer and font are selected. 5-33 5. CONFIGURATION FROM PC This page is intentionally left blank. 5-34 6. 6. 1 6. 1. 1 DATA COMMUNICATION Mobile Packet Data Service (RS-232) Introduction The Mobile Packet Data Service complies with the communication protocol defined by the Inmarsat F77 system. The transmission data rate over the satellite link is typically 20 kbps (a 64 kbps channel is shared with other users). Switching between MPDS and Mobile ISDN service is done from the PC. The PC must have Win 2000 or Win XP installed. Check Anyone's use, and click Next. Note: Hash # may be omitted on some PCs/ Windows versions. 12 Enter name and password for the connection. Uncheck Turn on Internet Connection Firewall for this connection. Complete the New Connection, click Finish. YANMAR 6-8 6. DATA COMMUNICATION 6. 1. 4 Checking default settings 1 Double-click Network Connections in the Control Panel. 2 Right-click the MPDS dial-up connection and click Properties. 6-9 6. DATA COMMUNICATION 3 Check settings in the MPDS Properties window: · Modem - Standard 33600 bps Modem (COM1) · Phone number: **94#. Click Configure. 4 In the Modem Configuration window, check that the Maximum speed (bps) is set to 115200. 6-10 6. DATA COMMUNICATION 5 In the MPDS Properties window, click Networking and check that Internet Protocol (TCP/IP) is selected. Click Settings. 6 In the PPP Settings window, Negotiate multi-link for single link connections should be unchecked. 6-11 6. DATA COMMUNICATION 6. 1. 5 Connecting to server Initiating an MPDS call Open the Control Panel on the PC and double-click the MPDS icon in the Network Connections window (i. e. If provided for the specific server connection, enter the User name and Password. Dialing **94# establishes the MPDS connection via the default Net provider (to HomeLES, see system overview). Click Dial to establish the connection to the server. See Connection in progress on next page. YANMAR 6-12 6. [. . . ] Call announcement from mobile to fixed: The MES uses the Return Identity (RTNID) to communicate with the LES. It uses the TermlD to identify its IMN number and the service in use. The attached equipment dials the number and transmits its MSN number to the MES. LES checks that the RTNID is commissioned before connecting the call to the fixed net. Calls from Mobiles Call announcement LES Return ID Service 2 ABCDEF 4. 8kbps speech Fixed net 004767244700 number 67244700 PSTN 00 47 67 24 47 00 $" $ & # + 8 5 LES MSN Service 20 60 61 48 0 4. 8 kbps speech 64 kbps data (Gr. 4 fax) 64 kbps data 64 kbps data (Gr. 3 fax) 4. 8 kbps speech Term. Id 1 51 52 61 91 When the MES originates a call it starts by sending a request to the LES. [. . . ]