User manual YANMAR 3HM

[. . . ] · The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. · The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. [. . . ] · All the registered handsets start to ring. 2 Once retrieved, press any key on the handset to end the paging. Note If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode. Use more of your phone Establish a three-party conference call The conference call feature allows one external call to be shared with two 24 5. 8. 5 Tip Press p key on the base station again to stop paging. · A validation tone is emitted and the screen returns to previous menu. Tip Press and hold p key in idle mode to switch between handset name and time/ date display mode. Note Enter the date in Day/Month format and the time in 24-hour format. An error tone will be emitted if an invalid digit is entered in the date/time fields. Hour: 00 to 23; Minute: 00 to 59 Date: 01 to 31; Month: 01 to 12 !Warning If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider. 5. 10 Chain Dialling This feature allows you to dial an extension to a number already saved in the phonebook during a call. The default handset name of your handset is YANMAR. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to HANDSET NAME and press mOK. Press pBACK key to delete the characters one by one. 27 3 Enter the new name (maximum 10 characters) and press mOK to confirm. · A validation tone is emitted and the screen returns to previous menu. Tip Once the display language is set, the option menus on the handset will switch to display in the selected language immediately. However, it will not change the language of the predefined outgoing message of your answering machine. Activate/Deactivate Auto Answer This function enables you to answer a call automatically by simply lifting the handset off the base station. By default, the Auto Answer feature is OFF and in this case you have to press the r key to answer a call. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to AUTO ANSWER and press mOK. 2 Scroll : to ON or OFF and press mOK to confirm. · A validation tone is emitted and the screen returns to previous menu. 6. 3 6. 4 Change the Display Language Your handset can support different display languages, depending on your country selection during the WELCOME mode. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to LANGUAGE and press mOK. 2 Scroll : to your desired language and press mOK to confirm. [. . . ] · Move the base station as far away as possible from the electrical appliances. · Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call!The handset consumes energy while calling. [. . . ]