User manual YASHICA ELECTRO 35 GSN

[. . . ] Blade extensions are retained with the dozer making them easy to use and ensuring that they are not lost. Dozer Float Ground levelling and finishing applications are fast and easy with the dozer float function engaged making site clean-up much more efficient. Long Dozer Option The optional longer dozer blade enables improved ‘dig to blade’ characteristics to give easier on site clean up. 100% Pilot Controls Delivers excellent machine control and lifetime ‘as new’ performance eliminating the need for linkage and cable maintenance, lowering owning and operating costs and resulting in less downtime. 5 Versatility Flexibility built in for a variety of jobs. High Flexibility Compact in size and with a transport weight under 2000 kg (4, 500 lb), the ELECTRO 35 GSN can be transported easily using a conventional trailer and pick up truck or transit van. The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites. Automatic Swing Lock Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped. Work Tools A range of work tools are available including buckets, hammer and auger to take advantage of the machines versatility. [. . . ] The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites. Automatic Swing Lock Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped. Work Tools A range of work tools are available including buckets, hammer and auger to take advantage of the machines versatility. All these tools are matched to the machine to optimize performance and deliver excellent value through productivity and long life. Auxiliary Hydraulics as Standard Fit Machine is ‘ready to work’. Hammer and two way lines complete with quick disconnect fittings as standard. Connections are located close to the tool to reduce hose lengths and any potential damage. Additional line options are available to further increase machine versatility. Stick and bucket cylinder hoses are protected by routing them through the boom. Auxiliary Flow Control Machines configured with proportional auxiliary hydraulics, include the ability to adjust the flow for even greater tool control. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine’s appearance and value. 9 ELECTRO 35 GSN Mini Hydraulic Excavator Specifications Engine Engine Model Rated Net Power @ 2, 200 rpm (ISO 9249) Gross Power (ISO 14396) Displacement Yanmar 3TNV76 13. 2 kW 17. 7 hp 17. 9 kW 1116 cm3 24. 3 hp 40 in3 Blade Width Height Dig Depth – Standard Blade Lift Height – Standard Blade 990 mm 230 mm 317 mm 197 mm 39 in 9 in 12. 5 in 8 in Weights Transport Weight with Canopy Transport Weight with Cab Transport Weight with Canopy and Extending Undercarriage Transport Weight with Cab and Extending Undercarriage 1610 kg 1720 kg 1735 kg 1845 kg 3, 550 lb 3, 792 lb 3, 825 lb 4, 068 lb Hydraulic System Pump Flow @ 2, 200 rpm 23. 8 + 23. 8 + 19. 0 + 6. 4 L/min 200 bar 200 bar 125 bar 6. 29 + 6. 29 + 5. 0 + 1. 7 gal/min 2, 900 psi 2, 900 psi 1, 813 psi 8 gal/min at 2, 465 psi 4. 5 gal/min at 2, 900 psi 4, 226 lbf 2, 518 lbf 2, 203 lbf Travel System Travel Speed Gradeability 2. 8 km/h/ 5. 6 km/h 30°/58% 1. 74 mph/ 3. 48 mph Operating Pressure – Equipment Operating Pressure – Travel Operating Pressure – Swing Auxiliary Circuits Primary Service Refill Capacities Fuel Tank Capacity Hydraulic Tank Capacity 24 L 21 L 6. 3 gal 5. 5 gal 30 L/min at 170 bar Secondary 17 L/min at 200 bar Maximum Bucket Force 18. 8 kN Maximum Stick Force – Standard Stick 11. 2 kN Maximum Stick Force – Long Stick 9. 8 kN Lift Capacity at Ground Level 2 m (6'7") Lift Point Radius kg Long Stick/ Fixed Undercarriage Front lb kg Side lb kg 2. 5 m (8'2") Front lb kg Side lb 882 kg Front lb kg 3 m (9'10") Side lb 717 kg 440* Front lb 970* kg 300 Maximum Side lb 661 835* 1, 840* 580 1, 279 605* 1, 334* 400 470* 1, 036* 325 *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. 10 Dimensions All dimensions are approximate. 6 7 1 12 14 3 5 4 10 11 8 16 2 15 9 13 1 Height 2 Width 3 Transport Length (arm lowered) 4 Maximum Digging Depth 5 Maximum Vertical Dig Depth 6 Maximum Dig Height 7 Maximum Dump Height 8 Maximum Reach at Ground Level 9 Tail Swing Radius 10 Maximum Boom Offset (RH) 11 Maximum Boom Offset (LH) 12 Maximum Dozer Lift Height 13 Maximum Dozer Dig Depth 14 Length of Undercarriage (Fixed) 14 Length of Undercarriage (Extending) 15 Boom Swing Angle (RH) 16 Boom Swing Angle (LH) Standard Stick 2290 mm 7'5" 990 mm-1300 mm 3855 mm 2200 mm 1430 mm 3485 mm 2500 mm 3700 mm 1170 mm 520 mm 360 mm 200 mm 320 mm 1445 mm 1600 mm 48° 77°/64° 3'3"-4'3" 12'8" 7'3" 4'8" 11'5" 8'3" 12'2" 3'10" 1'8" 1'2" 8" 1'0" 4'9" 5'3" Long Stick 2290 mm 990 mm-1300 mm 3855 mm 2400 mm 1620 mm 3595 mm 2610 mm 3895 mm 1170 mm 520 mm 360 mm 200 mm 320 mm 1445 mm 1600 mm 48° 77°/64° 7'5" 3'3"-4'3" 12'8" 7'11" 5'4" 11'9" 8'7" 12'9" 3'10" 1'8" 1'2" 8" 1'0" 4'9" 5'3" 11 ELECTRO 35 GSN Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. • • • • • 230 mm (9 in) rubber track Hammer/two way auxiliary hydraulic lines Auxiliary quick disconnect couplers Standard length dozer blade Working light mounted to boom • • • • • Canopy – ROPS and TOPS protection Retractable seat belt Suspension seat, vinyl covered Travel pedals Maintenance free battery • • • • Hydraulic oil cooler Fixed undercarriage Automatic swing park brake Dozer float 12 ELECTRO 35 GSN Optional Equipment Optional Equipment Optional equipment may vary. Consult your Cat dealer for details. • Cab, radio ready – ROPS and TOPS protection • Suspension seat, fabric covered • Boom stick or dozer blade check valve • Mirror pack • Removable swing stop • Additional hydraulic circuit diverted from bucket cylinder • Cab top guard to ISO 10262 (Level 1) • Auto engine idle • Joystick mounted proportional auxiliary control with flow control • • • • • Long dozer blade Long stick Extending undercarriage Cab/canopy lights Second auxiliary lines 13 Notes 14 15 ELECTRO 35 GSN Mini Hydraulic Excavator For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www. cat. com © 2012 Caterpillar Inc. All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. [. . . ] All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. [. . . ]