User manual YORKVILLE YSM8

[. . . ] Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. [. . . ] The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Welcome to the next generation of Yorkville Sound Powered Studio Monitors. Building upon our technical knowledge and experience we have developed better sounding monitors which are easier to use in virtually any environment. The Yorkville Sound monitors are at home in professional recording studios, home studios and living rooms. We're confident that the YSM5, YSM6 or YSM8 will help you cut to the mix and create fantastic music! the YSM5 , YSM6 and YSM8 feature 1-inch black-silk diaphragm neodymium dome tweeters. These tweeters use specially designed waveguide bevelled edge housings. The waveguide bevelled edges perfectly couple the tweeter with the woofer, reducing sonic anomalies normally created by their proximity. This guarantees perfect performance and eliminates the phase irregularities between tweeter and woofer that are usually associated with passive crossover networks. Mains Voltage Select Switch, Cord and Fuse Replacement Before plugging the power cord in the back of the YSM5, YSM6 or YSM8 set the Voltage Switch to the required voltage, either 110-120 VAC (North America) or 220240 VAC (Europe and Australia). NOTE: If the fuse needs replacing, disconnect the power cord from the back of the unit; using a small flat head screw driver, pry out the plastic fuse holder located just beside the power receptacle. Refer to replacement values printed at the back of the unit, near the Serial Number. Fuse is blown, if replaced and it still blows then there is permanent fault inside the unit and should be returned to a Yorkville dealer. Input Jack The inputs of all three monitors are balanced and can use a ¼-inch TRS phone jack or XLR connector. If you need to use an RCA cable to connect, use a standard RCA > ¼-inch adapter such as the APEX AA1/6. [. . . ] 2 1 2 yes power on front base foam pad mdf mdf Enamel N/A 10. 2 1 1 1 Commande de Volume Commandes d'égalisa on 1 2 2 Limiteur yes Yes yes DEL Indicatrice limenta on panneau avanlimenta on panneau avanlimenta on panneau avan Autres Contrôles / Caractéris ques base en mousse base en mousse base en mousse Matériaux de Constuc on mdf mdf mdf Matériaux - Baffle mdf mdf mdf Fini on Émail Émail Émail Fini on/Recouvrement Op onnel N/A N/A N/A Dimensions (PLH x L arrière, pouces) 9. Unlimited Warranty Yorkville's two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. [. . . ]