User manual ZALMAN CNPS6000(S)

[. . . ] 4) By utilizing a 92mm fan, both the CPU and the motherboard chipset are cooled. 5) The cooling fan can be mounted at any desired location, making it compatible with virtually all computer cases and motherboards (Note: computer cases that have the power supply covering the CPU cannot be used). 6) With the included adjustable fan speed connector, the user can freely adjust the CPU fan's RPM. [. . . ] 4) When buying a new VGA Card, it is recommended to buy a VGA Card without a fan. Korean Patent Application No. 01-11056 Patent Applications Pending in over 20 nations around the world, including the U. S. , EU, and Japan The specifications of any product may change without prior notice to improve the performance thereof. CPU & Socket FHS Clip Fan Br123 Fan Fix 1 } FB123 < Figure 1 > 1. Spread the thermal grease thinly onto the CPU core's surface that comes in contact with the FHS as shown in Figure 2. Install the clip across the FHS as shown in Figure 2 3. Hook the short leg of the clip onto the socket first, then hook the long leg on by pushing the hole in the leg with the heatsink installation tool or an ordinary screw driver as shown in Figure 3. If you need to reinstall the FHS, remove the clip by inserting the heatsink installation tool into the clip's hole and pushing outward, as shown in Figure 4. Thermal Grease < Figure 2 > < Figure 3 > < Figure 4 > The specifications of any product may change without prior notice to improve the performance thereof. 1. As shown in Figure 6, you can freely place the fan and the bracket in any desired location with the FB123. Therefore, place the fan in an ideal location as shown in Figure 5. You can also place an additional fan on the FB123 to maximize the cooling of the VGA Card as shown in Figure 7. Screw on the FB123 firmly at the VGA Card slot hole and the expansion slot hole next to it with the included bolts. The included bolts are of two types: inch-sized and mm-sized. Use the appropriate type for the slot holes. ) < Figure 5 > < Figure 6 > < Figure 7 > The specifications of any product may change without prior notice to improve the performance thereof. 1. Connect FAN MATE 1 (adjustable fan speed connector) to the 3-pin connector of a fan as shown in Figure 8. Connect FAN MATE 1 to the 3-pin CPU fan connector of the mainboard. [. . . ] When the speed control knob is turned fully counter-clockwise, the fan speed is minimum and the fan operates in silent mode. You can select the desired fan speed by turning the knob. Note 2) FAN MATE 1 has been specifically designed for the fan of this product. [. . . ]