User manual ZALMAN CNPS7000A(S)

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZALMAN CNPS7000A(S). We hope that this ZALMAN CNPS7000A(S) user guide will be useful to you.

Lastmanuals help download the user guide ZALMAN CNPS7000A(S).

Download

Manual abstract: user guide ZALMAN CNPS7000A(S)

Detailed instructions for use are in the User's Guide.

 [. . . ] Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman Tech Is not responsible for any damage that occurs when moving a computer. 

1

3. Exploded View

Fan Clip Bolt Fan Bracket

Heatsink

Screw for Fan

Screw for Fan Support

4. Patent Applications pending in over 20 nations around the world,  including USA,  EU,  and Japan

5.  [. . . ] This product can not be installed if any Motherboard component(capacitor) taller than 1. 5cm is located under the clip. For more information,  refer to "Compatible Motherboard List" at our website(www. zalmanusa. com). 

Figure 2 (X)

3) AMD Athlon 64 - Socket 754 Visit our website (www. zalmanusa. com) for a list of compatible CPUs after Athlon 64 is officially released. 

SOCKET462

4

7. Installation (INTEL Pentium 4-478)
1) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core. 
Thermal Grease

CPU (IHS)

2) Install Clip Support Install the two clip supports at both sides of the retention guide as shown on the right. 

Retention Guide

Clip Support

Bolt

3) Insert Bolts Insert the bolts into the inner holes on the clip. 
Outer Hole Inter Hole Clip

4) Fasten Bolts Place the FHS on the center of the CPU. Screw in both bolts in an alternating fashion until they are completely tightened. 5) Supply Power Connect FAN MATE 1 between the motherboard and the fan. 

3-Pin Fan Connector (Mainboard)
 ;;;;;;;;;;;;;; QQQQQQQQQQQQQQ

;;;;;;;;;;;  ;;;;;;;;;;;;;;;; QQQQQQQQQQQQQQQQ QQQQQQQQQQQQQQQQ  ;;;;;;;;;;;;;;;; QQQQQQQQQQQQQQQQ QQQQQQQQQQQQQQQQ  ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; QQQQQQQQQQQQQQQQ  ;;;;;;;;;;;;;;;;

FAN MATE 1 Speed Control Knob

;;;;;;;;;;;;;  QQQQQQQQQQQQQQ

Mainboard

3-Pin Fan Connector (CNPS7000A)

5

8. Installation- AMD (Athlon/Duron/Athlon XP-462)
1) Install Clip Support Install the socket 462 Clip Supports as shown on the right. Ensure to install A-Type clip support(Blue) by the Lever. 
Small Washer M/B Small Washer Bolt B-Type Clip Support (White) B-Type Clip Support (White) A-Type Clip Support (Blue) Lever

2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core. 

CPU

Thermal Grease

3) Insert Bolts Insert the bolts into the inner holes on the clip. 

Bolt Outer Hole Inter Hole Clip

4) Fasten Bolts Place the FHS on the center of the CPU. Screw in both bolts in an alternating fashion until they are completely tightened. 5) Supply Power Connect FAN MATE 1 between the motherboard and the fan. 
3-Pin Fan Connector (Mainboard)
 ;;;;;;;;;;;;;;;; QQQQQQQQQQQQQQQQ

FAN MATE 1 Speed Control Knob

;;;;;;;;;;;;;  QQQQQQQQQQQQQQ

Mainboard

3-Pin Fan Connector (CNPS7000A)

6

9. Installation- AMD (Athlon 64-754)
1) Fasten Nipples Locate the backplate on the bottom of the mohterboard under the CPU socket,  then fasten the nipples as shown on the right.  [. . . ] If this happens,  turn the speed control knob fully clockwise to increase the fan speed. Then set `CPU Fan Detected' to `Disabled' in the BIOS settings,  or set the slowest rotational speed of the CPU fan in the system monitoring program to less than or equal to 1300 RPM. Now the fan can be set back to the silent mode by turning the knob counter clockwise. NOTE) Some motherboards do not boot if the rotational speed of the CPU fan below a certain number of RPM.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZALMAN CNPS7000A(S)

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZALMAN CNPS7000A(S) will begin.