User manual ZALMAN CNPSPLUS(S)

[. . . ] 4) By utilizing a 92mm fan, both the CPU and the motherboard chipset are cooled. 5) The cooling fan can be mounted at any desired location, making it compatible with virtually all computer cases and motherboards (Note: computer cases that have the power supply covering the CPU cannot be used). 6) CPU can be cooled to a temperature sufficiently below the temperature required by the CPU manufacturer in Silent Mode. [. . . ] 2) Install the clip across the FHS as shown in FIG. 2 3) Hook the short leg of the clip onto the socket first, then hook the long leg on by pushing the hole in the leg with the heatsink installation tool or an ordinary screw driver as shown in FIG. 4) If you need to reinstall the FHS, remove the clip by inserting the heatsink installation tool into the clip's hole and pushing outward, as shown in FIG. 4, or inserting an ordinary flathead screw driver into the clip's slit and pushing outward, as shown in FIG. 5 > The specifications of the cooler may change without prior notice to improve the performance thereof. 1) As shown in FIG. 7, you can freely place the fan and the bracket in any desired location with the FB123. Therefore, place the fan in an ideal location as shown in FIG. You can also place an additional fan on the FB123 to maximize the cooling of the VGA Card as shown in FIG. 2) Screw on the FB123 firmly at the VGA Card slot hole and the expansion slot hole next to it with the included bolts. The included bolts are of two types : inch-sized and mm-sized. Use the appropriate type for the slot holes. ) < Fig. 8 > The specifications of the cooler may change without prior notice to improve the performance thereof. Connect the noiseless connector (RCXX) to the FB123 fan's 3-pin connector. Then, connect the noiseless connector to the motherboard's CPU fan connector (3-pin) as shown in FIG. Note 1) The separate speed noiseless connector will be on sale afterwards (See FIG. [. . . ] For information on updating the BIOS, please refer to the motherboard manufacturer's web site. Connect the 3-pin connector of the fan directly to the fan connector (3-pin) of the motherboard as shown in FIG. Turn on the computer after the assembly is finished. If an alarm sound is generated to indicate that the rotation of the CPU fan is slow after the system monitoring program starts to operate during booting of the computer, please set "CPU Fan Detected" to "Disable" in the BIOS settings, or set the slowest rotation of the CPU fan to less than or equal to 1500 RPM. Fan Connector(3-pin) CPU fan Connector (3-pin) Motherboard < Fig. [. . . ]