User manual ZALMAN RESERATOR1V2

[. . . ] If the coolant isn't circulating or the pump is making a strange noise, turn the PC OFF immediately. Do not place any objects on the product. Install on a flat surface with no vibration or slant, and do not tilt or lay horizontally. Use distilled water for coolant, regularly check the amount of coolant, and replenish as needed. [. . . ] 8 Quick Coupling The Fittings incorporate valves that prevent leaks when disconnecting the PVC Tubes allowing quick, convenient separation and reassembly of the Reserator for transport and coolant replacement. 4 RESERATOR 1 V2 2. 1 Reserator (Reservoir+Radiator+Water pump) 1) Dissipation Area : 1. 274 2) Weight : 6. 5 kg 3) Dimensions : 150(L) x 150(W) x 592(H) mm 4) Material : Anodized Pure Aluminum 5) Max Coolant Capacity : 2. 5 6) Integrated Water Pump : 5 W, Qmax 300 (A type : 230V-50Hz, B type : 120V-60Hz, C type : 220V-60Hz, D type : 110V-60Hz) 7) Maximum Lift : 0. 5 m English 2. 2 CPU Water Block (ZM-WB4 Gold) 1) Weight : 135 g 2) Material : Polycarbonate Cover, Gold Plated Pure Copper Base 3) Dimensions : 63(L) x 63(W) x 16. 5(H) mm 4) Compatibility : Intel Pentium 4 (Socket 775/478), AMD Sempron / AMD64 (Athlon 64/Athlon 64 FX/Opteron) (Socket 754/939/940) 2. 3 VGA Water Block (ZM-GWB3) 1) Weight : 100 g 2) Material : Anodized Pure Aluminum 3) Dimensions : 60. 4(L) x 60. 4(W) x 30(H) mm 4) Compatibility : Graphics cards with heatsink mounting holes 2. 4 Northbridge Water Block (ZM-NWB1, Optional) 1) Weight : 48 g 2) Material : Anodized Pure Aluminum 3) Dimensions : 43(L) x 43(W) x 30(H) mm 2. 5 VGA RAM Water Block (ZM-RWB1, Optional) 1) Weight : 120 g 2) Material : Anodized Pure Aluminum 3) Dimensions : 19(L) x 122(W) x 12(H) mm 2. 6 Anti-Corrosion Coolant(ZM-G200) 1) Material : Propylene Glycol & Anti-Corrosion Agent 2) Volume : 500 3) Freezing Point : -9 4) Exchange Cycle : 1 year 5 RESERATOR 1 V2 3. Installation Overview 6 RESERATOR 1 V2 4. 2 CPU Water Block(ZM-WB4 Gold) 1SET Please refer to the separately provided manual for the ZM-WB4 Gold. 4. 3 VGA Water Block (ZM-GWB3) 1SET Please refer to the separately provided manual for the ZM-GWB3. 4. 10 Spare Parts Sealing Bolt 1EA Cable Fitting 1EA 7 RESERATOR 1 V2 Optional Components Northbridge Water Block (ZM-NWB1) This anodized, pure aluminum block is built for high performance cooling, and is designed for Motherboard compatibility with a wide variety of northbridge chipsets. VGA RAM Water Block (ZM-RWB1) This VGA RAM Water Block is compatible with GeForce 7800/7900 and ATI X1800/X1900 in need of VGA RAM cooling. PVC Tube If the standard PVC tube is found to be short or you need to use the tube on another system, additional tubes can be purchased separately (12 x 8 mm). Heatpipe HDD Cooler This component cools the heat generated from the hard disk drive and reduces the vibration that is passed onto the computer's enclosure. Power Supply By implementing heat-sensor circuitry that controls the fan's speed in relation to the temperature within the power supply, noise is significantly reduced, making this component suitable for noiseless systems. 8 RESERATOR 1 V2 5. 1 Check for Leaks Before installing the product on a PC, check each Water Block and the Reserator for leaks. English 5. 2 Determine the Placement of the Reserator The Reserator's placement should be determined in relation to the position of the PC. Place it upright next to or slightly above the PC. Note that if the Reserator is placed lower than the PC, the PVC tube's internal air pressure may prevent proper initial operation. 5. 3 Install the CPU Water Block (ZM-WB4 Gold) 1) Refer to the manual included with the ZM-WB4 Gold for installation instructions. 2) If physical interference occurs while installing the Water Block, stop the installation. 5. 4 Install the VGA Water Block (ZM-GWB3) 1) Refer to the manual included with the ZM-GWB3 for installation instructions. 5. 5 Install the I/O Bracket 1) As shown in the diagram, install the I/O bracket on a PCI slot on the computer case. I/O Bracket should be installed at the lowest possible slot. 9 RESERATOR 1 V2 5. 6 Connect the CPU Water Block and the VGA Water Block 1) As shown in the diagram, connect the two water blocks with a PVC tube. 5. 7 Connect the VGA Water Block with Reserator's Base IN 1) As shown in the diagram, connect one end of the PVC Tube to the VGA Water Block Fitting and fasten with a Tube Clamp. [. . . ] If there is a leak, circuitry and other components may short circuit and malfunction, so be careful. 4) If there is a leak, turn the pump off immediately, wipe the area that leaked with a paper towel, and reassemble the affected part. 5) While the pump is turned on, check the circulation status with the Flow Indicator. If the coolant is circulating well, the cap inside the Flow Indicator will shake rapidly. [. . . ]