User manual ZANKER ZKS5619IE

[. . . ] Geschirrspüler Dishwasher Lave-vaisselle Afwasmachine ZKS 5619 IE Bedienungsanleitung Instruction book Mode d'emploi Gebruiksaanwijzing CONTENTS Warnings . . page 22 Positioning, water outlet connection, water supply connections . . page 25 Use of rinse aid, use of detergent . . page 26 Loading the machine, use of the lower basket, use of the upper basket . [. . . ] Glasses with long stems can be placed upside-down in the raised cupracks. Adjusting the height of the upper basket If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position as follows: - pull out the basket; - grasp it on the two sides and pull it upwards until the mechanism is engaged and the basket is stable. RC04 When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup-racks. To put the basket back in the lower position, grasp the two sides, pull upwards again, then allow the basket to drop back down slowly, keeping hold of it. Warning: never lift or lower the basket on one side only. US14 IEC 436 / DIN 44990 US12 Caution When loading the dishes, ensure that you do not cover the water inlet funnel in the middle of the upper basket. US16 US16 Before closing the door, ensure that the spray arms can rotate freely. PCE28GB 28 HELPFUL HINTS For best washing results: Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Always arrange saucepans, cups and glasses etc. Tilt items with convex or concave surfaces so that the water drains off easily. Long items of cutlery such as ladles, carving knives etc. should be positioned horizontally in the upper basket. Avoid contact between the dishes as far as possible; correct arrangement of the items will give better washing results. Light items (plastic bowls etc. ) should be loaded in the upper basket and arranged so that they do not move during washing. Items not suitable for dishwashers The following should not be washed in the dishwasher: Cutlery or dishes with wooden or horn handles or glued parts. Handmade items, wooden objects, antiques or handpainted china. Certain types of decoration can discolour when washed in a dishwasher. Crystal-ware and plastic objects, if not guaranteed dishwasher-proof, should be washed by hand. You are advised to place them in the upper basket and to select a delicate programme. Certain types of glass can also become opaque after being washed several times in a dishwasher. Silver cutlery tends to go black if mixed with steel cutlery. Place it in the cutlery basket separate from the others. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black; copper, pewter and brass tend to stain. Operating your dishwasher economically and with regard for the environment Do not prewash dishes under running water. Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see Programme Chart on the following pages), so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. If you use the modern «compact» powders containing enzymes, we recommend that you select a "Bio 50°C" programme in place of the "Normal 65°C" programme. Select an economic programme when the baskets are not very full and/or when the dishes are not very soiled, following the instructions given in the "Programme chart". [. . . ] Make sure that the water fill and drain hoses and the power supply cable are not bent or kinked. 820 ÷ 880 0 ÷ 60mm 596 818 ÷ 878 Fitting the panel onto the door The door on this model is designed for the overlay of a panel having the following dimensions: Width: 596 mm Height: 644 to 714 mm max Thickness: 20 mm max Weight: 2 to 7. 5 kg max Note: The panel height should not be more than what indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth. 5 55ax m II28 II07 The recess height may be anywhere between 820 and 880 mm from the floor since the dishwasher incorporates levelling feet adjustable over a wide range (max 60 mm). Adjust the height of the appliance by turning these feet. A distance of 2 mm should be allowed between the top of the dishwasher and the counter top. Two pads are also supplied to make sliding-in or sliding-out of the appliance easier. [. . . ]