User manual ZANUSSI BMF810W

[. . . ] BUILT-IN OVEN BMF 810 INSTRUCTION BOOKLET IL 2 English Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. It is dangerous to alter the specification in any way. Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. [. . . ] Press button repeatedly to select the End of cooking function. The relevant pilot lamp will start flashing. Then, proceed as follows: To set the End of cooking time: 1. After the setting is carried out, wait for 5 seconds: the End of cooking pilot lamp will come on and the display will revert to the time of day. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: when doing this operation, the oven will be operated again, therefore, remember to turn the oven function and the thermostat control knob to zero when cooking is over. Press button repeatedly to select the End of cooking function. The relevant pilot lamp will flash and the display will show the programmed End of cooking time. Press button until the display shows the current time of day. The programmer will beep and the pilot lamp will go out. End of cooking function Cooking duration time combined and End of cooking The functions Cooking duration e End of cooking time can be used simultaneously to set the oven to switch on and off automatically at a later time. This could cause a heat build-up which could affect the performance of the oven and damage the oven enamel. Carefully supervise cookings with fats or oil, since these types of foodstuff can result in a fire, if overheated. For the same reason, be careful when placing or removing food in the oven, not to let any fat or oil fall on the oven base. If this happens, carefully clean the oven to avoid unpleasant smells or smoke. Fan cooking Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required temperature. The fan behind the back panel circulates heated air into the oven. If you need to cook more than one dish in the fan oven at the same time, place the shelves on the first and third position from the bottom (Fig. 8). If you are cooking only one dish in the fan oven, use the lower positions, as this will give you better results. Hints and Tips on Cooking Fish and Meat You can place meat in oven proof dishes, or directly on the oven shelf. In this case, remember to place the dripping pan in the first position from the bottom with some water in it. The dripping pan will avoid the falling of melted fat on the oven base. White meat, poultry and fish in general, need a medium temperature cooking (between 150 and 175 °C). [. . . ] n Steam and condensation settle on the food and the oven cavity. Technical Assistance If after the checks listed in the previous chapter, the appliance still does not work correctly, contact your local Service Centre, specifying the type of malfunctioning, the appliance model (Mod. ), the product number (Prod. No. ) marked on the identification plate. This plate is placed on the front external edge of the oven cavity. Original spareparts, certified by the product manufacturer and carrying this symbol are only available at our Service Centre and authorized spareparts shops. Mod. [. . . ]