Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZANUSSI DA6141D. We hope that this ZANUSSI DA6141D user guide will be useful to you.
Lastmanuals help download the user guide ZANUSSI DA6141D.
Detailed instructions for use are in the User's Guide.
[. . . ] DISHWASHER DA 6141 D
152969 74/0
Instruction book
UK
Description of the appliance
1. Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm
10. Worktop
IN148
The control panel
2
In daily use
q q q q
Check if it's necessary to refill with special salt or rinse aid Load cutlery and dishes into the dishwasher. Select a wash programme suitable for the cutlery and dishes. [. . . ] The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Rinse aid can be added in one of two ways:
q
To fill:
1. Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time). Using the funnel provided, pour in the salt until the container is full. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. Screw on the cap tightly turning it clockwise until it stops with a click.
LE SA UT ZO LT SA LZ SA L SE
If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid is placed in the detergent compartment. - In this case the rinse aid compartment must be empty. If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using detergent that contains rinse aid. If you are using dishwasher detergent and rinse aid separately, the rinse aid is to be put into the rinse aid dispenser. - In this case the rinse aid dosage must be set in position from 1 to 6 (see "Adjusting the dose").
q
Filling with rinse aid
(Rinse aid dispenser type A)
1. Open the container by pressing the release button (A).
SR14
The salt container will require topping up periodically. According to the model of dishwasher, you are reminded of this by: A) The salt cap has a refill indicator window in the centre. A green float is clearly visible when there is salt inside the container and almost disappears when the salt has finished reminding you to add salt.
2. Fill with rinse aid exactly up to the level indicator marked "max".
BR07
BR14
Ensure that the lid is closed after every refill.
Adjusting the dose
SR22
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.
B) A salt indicator light on the control panel will come on when the salt has finished. The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
Do not worry if water over flows from the unit when filling with salt, this is quite normal.
BR09
4
Filling with rinse aid
(Rinse aid dispenser type B)
1. Open the container by turning the lid (A) anticlockwise. Fill with rinse aid exactly up to the level indicator marked "max".
Top up with rinse aid when:
1. The indicator (B) becomes clear,
BR11
BR03
BR01
BR13
Ensure the lid is closed after every refill.
2. [. . . ] If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.
3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI DA6141D
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI DA6141D will begin.