User manual ZANUSSI DA6141SIL

[. . . ] Instruction Book - Part 1 - Before use - Maintenance - Installation DISHWASHER Contents Important safety information Before use Setting the water softener Filling with salt Filling with rinse aid and adjusting the dose Use of detergent Hints and tips Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Installation Water supply connections Water outlet connection Electrical connection 2 3 3 4 5 6 7 8 8 8 8 8 8 8 9 10 10 10 11 Guide to use the instruction book Safety instructions 1. Step by step Hints and tips Environmental information 152981 19/2 1 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] When buying new dishes, ensure that they are dishwasher proof. For best washing and drying results Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Arrange saucepans, cups and glasses etc. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible. For best results we recommend the use of Finish detergents, rinse aid and salt. POURING EASY PACK TION DOUBLE AC FOR A BRILLIANT SHINE N EW LIQUID GEL POWDER RINSE C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T DE15 7 Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. Remove the water inlet and discharge hoses. Pull the machine out together with the hoses. Avoid over tilting the machine during transportation. 8 Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee. Symptom The machine will not start Solution q q q The door has not been properly closed. The plug is not properly inserted in the power socket. Ensure the mains water supply has not been cut off. Switch off the water supply and clean the filter. Clean the filters (refer to "Maintenance and cleaning"). Ensure the crockery is loaded correctly. The drain hose extension is not correct. Follow the instructions for connecting to the waste. There is no vent in the end of the drain hose. Dishes are rattling against each other, refer to "Loading your machine". The spray arms are knocking against the dishes. Refer to "Loading your machine". The dishwasher is not level, or not properly built-in. Check that there is salt and that the salt cap is tight. [. . . ] Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser according to the "Washing programmes" chart. Close the detergent dispenser lid. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Important! [. . . ]