User manual ZANUSSI DE4554

[. . . ] DISHWASHER DE 4554 DE 4554 S 152969 89/1 Instruction Book UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 4 5 5 6 6 8 8 8 8 9 9 10 11 12 13 13 13 13 13 14 16 16 16 Installation instructions Fitting under a counter Levelling Water supply connections Water outlet hose connection Electrical connection Hints for test centres 17 17 17 17 17 18 19 Technical specifications Dimensions Width Height with worktop Height without worktop Max depth Max depth with open door 45 cm 85 cm 82 cm 63 cm 115. 9 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 9 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] Press the On/Off push button The On/Off indicator light will come on. 7. Setting/cancelling the "Delay start" The setting of the delay start occurs before selecting the programme. Setting the "Delay start" Press the "delay start" push button until the indicator light corresponding to the chosen hours flashes (3, 6 or 9 hours). Press the push button corresponding to the required washing programme; the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. The start of the countdown will occur after about 6 seconds from the last pressure of a programme push button. The countdown will decrease with step of 3 hours and you are informed of this by the indicator lights of the hours. During the countdown, only the indicator light of the selected programme and the indicator light of the number of hours to the start of the programme will remain illuminated. Once the delay start has elapsed the programme will start automatically. 5. Setting and starting the programme Press the push button corresponding to the required programme (see "Washing programmes" chart). The indicator light corresponding to the programme illuminates and the phase indicator lights foreseen for that programme start flashing. The start of the programme will occur after about 6 seconds from the last pressure of a programme push button, in this time it is possible to change programme simply pressing the push button of another programme. Once the programme has started the phase indicator lights will turn off except for the phase under way. Cancelling the "delay start" It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start push button until the indicator lights corresponding to the delay start hours are off. In this case the selected washing programme will start automatically after 6 seconds. 6. Interrupting/cancelling a washing programme in progress Change or interrupt a washing programme in progress ONLY if it's absolutely necessary. Hot steam may escape when the door is opened. End of the washing programme The dishwasher will automatically stop and the end of programme (END) phase indicator light will illuminate. The indicator light of the programme just ended will remain on. The dishwasher has finished the programme only when the end of programme indicator light (END) is illuminated. If you do not wait for the end of the programme it will not be possible to start a new programme until the previous programme has been cancelled. (For instructions on how to cancel a programme see the corresponding instructions). Switch off the dishwasher by pressing the On/Off push button, the On/Off indicator light turns off. Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. To interrupt a washing programme in progress a) Open the dishwasher door; the programme will stop. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Electrical connection This appliance must be earthed. [. . . ]