User manual ZANUSSI DE540X

[. . . ] DISHWASHER DE 540 X 152967 34/0 Instruction Book UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions Installation instructions Fitting under a counter Levelling Water supply connections Water outlet hose connection Electrical connection Hints for test centres 3 3 3 4 4 5 5 6 6 8 8 8 8 9 9 10 11 12 13 14 14 14 14 14 15 17 17 18 19 19 19 19 20 20 21 Technical specifications Dimensions Width Height with worktop Height without worktop Max depth Max depth with open door 60 cm 85 cm 82 cm 61 cm 118. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. (2) (3) 12 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off push button The On/Off indicator light will come on. 7. Setting/cancelling the "Delay start" The setting of the delay start occurs before selecting the programme. Setting the "Delay start" Press the "delay start" push button until the indicator light corresponding to the chosen hours flashes (3, 6 or 9 hours). Press the push button corresponding to the required washing programme; the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. From the moment that the washing programme has been set, the delay start will begin with the countdown. The countdown will decrease with step of 3 hours. During the countdown, the indicator light of the selected programme and the indicator light of the number of hours to the start of the programme will remain illuminated. Once the delay start has elapsed the programme will start automatically, the indicator lights for delay start turn off and the indicator light of the phase underway illuminates. 5. Setting and starting the programme Press the push button corresponding to the required programme (see "Washing programmes" chart). The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will illuminate. After about 3 seconds from the last pressure of a push button the programme starts automatically. Once the programme has started the phase indicator lights will turn off except for the phase under way. Note: it is possible to select a washing programme also with the door slightly opened. In this case the start of the programme will occur after about 3 seconds from the closure of the door. The programme will start automatically after about 3 seconds from the closure of the door. Cancelling the "delay start" It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start push button until the indicator lights corresponding to the delay start hours are off. In this case the selected washing programme will start automatically after a few seconds. 8 . [. . . ] The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. [. . . ]