User manual ZANUSSI DE6644

[. . . ] GESCHIRRSPÜLER DISHWASHER DE 6644 D GB Bedienungsanleitung Instruction book Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Protection against flooding Hints for test centres Technical specifications 28 29 30 31 31 34 36 36 37 38 39 40 41 43 43 43 44 44 44 44 45 46 46 47 47 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Fitting under a counter Levelling 48 48 49 50 50 50 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 27 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the daily programme for excellence. ** Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). Characterised by a duration of about 30 minutes and a washing temperature of 60°C. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. *** Testing programme for EN 50242 (see "Hints for Test Centres). 40 Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 8. Setting and starting the programme Press the push button corresponding to the required programme: the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. The start of the programme will occur after about 6 seconds from the last pressure of a push button (programme or half load push button), in this time it is possible to change programme simply pressing the push button of another programme. Once the programme has started the phase indicator lights will turn off except for the phase under way. It is possible to interrupt the programme by: q q 2. Press the On/Off push button The On/Off indicator light will come on. 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary. 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. opening the door pressing the On/Off push button (in this case all the indicator lights turn off) 5. Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser according to the recommended quantity given in the Washing programmes chart. Close the detergent dispenser lid. Close the door again or press the On/Off, the programme will start from the point in which it was interrupted. To cancel a programme in progress A programme in progress can be cancelled at any time. Press for about 3 seconds the push button of the running programme until all indicator lights are off. Only the On/Off indicator light will remain on once the programme has been cancelled. It is now possible to select a new washing programme. 6. 7. Close the dishwasher door 41 10. At the end of the washing programme The dishwasher will automatically stop and the phase indicator light end of programme will come on. The indicator light of the programme just ended will remain on. Important!In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. The dishwasher has finished the programme only when the end of programme indicator light is illuminated. If you do not wait for the end of the programme it will not be possible to start a new programme if first you do not cancel the previous. [. . . ] To the sink outlet spigot, securing it if necessary with a clip. Hooked over the edge of the sink using the special curved plastic guide provided. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. CS09 1 Ø 21 Ø 18 2 3 The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. Ø 18 Ø 21 + 2 m max CS10 The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. [. . . ]