User manual ZANUSSI DWS4825

[. . . ] DISHWASHER DWS 4825 152982 49/0 INSTRUCTION BOOKLET GB Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Hints for test centres Technical specifications 3 4 4 5 5 7 8 8 9 10 11 12 13 14 14 14 15 15 15 15 16 17 18 18 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Adjusting the worktop Fitting under a counter Levelling 19 19 20 20 21 21 21 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 2 IND32en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] A chemical reaction can occur between silver cutlery and stainless steel cutlery. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black, copper, pewter and brass tend to stain. If in doubt check with manufacturer of the item. When buying new dishes, ensure that they are dishwasher proof. For best washing results Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Arrange saucepans, cups and glasses etc. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible. 11 CON04en Washing programmes Programme Degree of soil and type of load Normal soil. Crockery and cutlery Starting position of the programme selector Required push buttons Recommended quantity of detergent wash prewash Cycle description Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Main wash up to 50°C 1 cold rinse 1 hot rinse 1 cold rinse, (to avoid food scraps from sticking together). Normal 65°C with prewash A 65 + On/Off 20 g 5g Normal 65°C no prewash Light soil. Crockery and cutlery B 65 + On/Off 25 g / * BIO 50°C Normal soil. Crockery and cutlery A BIO + On/Off 20 g 5g ** Quick 50°C Light soil. Crockery and party crockery Rinse and Hold Any. Partial load (to be completed later in the day). C BIO + On/Off 25 g / D On/Off / / * Testing programme for EN 50242 (see "Hints for Test Centres"). ** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. 12 PRO04en Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 8. Start the programme Depress the On/Off push button. The On/Off indicator light will come on and the machine will start. If you wish to interrupt the washing programme at any time press this button again. 2. Check that there is rinse aid and salt Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. 3. 9. At the end of the washing programme At the end of the programme the dishwasher will automatically stop. The On/Off indicator light remains on until the On/Off push button is depressed. 10. Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser according to the "Washing programmes" chart. [. . . ] Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter. For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto either a 3/4" inch gas thread spout, or to a purpose made quick-coupling tap such as the Pressblock. CA17 19 COL04en Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. [. . . ]