Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZANUSSI FJ1094G. We hope that this ZANUSSI FJ1094G user guide will be useful to you.
Lastmanuals help download the user guide ZANUSSI FJ1094G.
Detailed instructions for use are in the User's Guide.
[. . . ] W ASHING MACHINE FJ 1094 G
1000 RINSE HOLD QUICK WASH ON-OFF
124983292
INSTRUCTION BOOKLET
i Your New Washing Machine
Your new washing machine, fitted with the Zanussi "JET SYSTEM", meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed "economically" because the amount of water used is regulated automatically according to the load and type of fabric.
s
s
s
Automatic cooling of the wash water to 60°C before draining, with the 95°C programme, prevents distortion of plastic pipes in the domestic water system due to the high temperature of the water. The special wool programme with its new delicate wash system treats your woollen with extreme gentleness. The anti-unbalance device ensures that the washing machine remains stable when spinning.
In the interest of the environment
s s
s
Ecological hints
To save water and energy and help protect the environment, we recommend that you follow these hints: s Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling. [. . . ] Non fast coloured cotton or linen fabrics, shirts, blouses, underwear. Separate spin for cotton and linen items
Q
Prewash at 40 °C Short spin at 650 rpm
4. 5 kg
BOILWASH
A
Wash at 95 °C 4 rinses Long spin at 1000 rpm
4. 5 kg
FAST COLOUREDS
B(*)
Wash at 60 °C 4 rinses Long spin at 1000 rpm Wash at 40 °C 4 rinses Long spin at 1000 rpm
4. 5 kg
NON- FAST COLOUREDS
C D
4. 5 kg
SPIN 1000
Long spin at 1000 rpm
4. 5 kg
(*) This 60°C programme is the reference programme for the Energy label according to EEC Directive 92/75: Water 60 litres Energy 1. 2 kWh Time 125 mins Water filling: 30°-40° programmes: cold water filling 50°-60°-95° programmes: hot and cold fillingWater filling
14
Washing Programmes
Programmes for synthetics, delicates and wool
Wash programme Degree of soil and type of laundry Synthetic or mixed fabrics, underwear, coloured garments, non-shrink shirts, blouses. Synthetic or mixed fabrics, underwear, coloured garments, non-shrink shirts, blouses. Delicate fabrics, for example curtains Specially tested programme for wool garments bearing the "Pure new wool, nonshrink, machine washable" label. Lightly soiled synthetic or delicate items This programme can be used for rinsing hand washed garments. Programme dial position Description Wash at 50 °C 3 rinses Short spin at 650 rpm Wash at 40 °C 3 rinses Short spin at 650 rpm Wash at 40 °C 3 rinses Short spin at 650 rpm Wash at 40 °C 3 rinses Short spin at 650 rpm Wash at 30 °C 3 rinses Short spin at 650 rpm 3 rinses, with fabric softener, if required Short spin at 650 rpm 1 rinse, with fabric softener, if required Short spin at 650 rpm Draining of water and short spin at 650 rpm Possible option Max. load
MIXED FABRICS
F
2 kg
MIXED FABRICS
G
2 kg
DELICATES/ SYNTHETICS
H
2 kg
WOOL
J
1 kg
30
WORN ONCE
K
2 kg
HAND RINSES
L
2 kg
FRESHEN UP
For softening hand washed garments
M
2 kg
SPIN 650
Separate spin for synthetics and delicates For emptying out the last rinse water in programmes with the Rinse Hold option.
N
2 kg
DRAIN
P
Draining of water
-
15
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
From time to time the washing powder and additive dispenser drawer should be cleaned. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme for a few minutes without any clothes in the drum.
P0224
P0225
P0038
16
Cleaning the filter
The water drain filter
A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage. To do this, unhook the drain hose from the standpipe or sink and hold the end of the hose over a bowl on the floor. The water should drain by gravity into the bowl. When the bowl is full, hook the hose back up and empty the bowl. Repeat the procedure until water stops flowing out. Clean carefully under a fast running tap.
P0011
P0132
Warning
When the appliance is in use and depending on the programme selected there can be hot water in the filter. [. . . ] Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. If possible, always place the machine on a solid floor.
P0850
Special conditions
If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI FJ1094G
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI FJ1094G will begin.