User manual ZANUSSI FJS1597W

[. . . ] The anti-unbalance device ensures that the washing machine remains stable when spinning. Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). >PE<= polyethylene >PS<= polystyrene >PP<= polypropylene s s Washing machine scrapping s s When the appliance is to be scrapped, cut off the power supply cable and make the door closing device inoperative to avoid it becoming a death trap for a child. For correct disposal of the machine, contact your local authority department which provides for collection of urban solid refuse. Ecological hints In order to obtain water and energy savings and to protect the environment, we advice you to follow these instructions: s Whenever possible, wash the maximum load for the selected programme, without overloading the drum. [. . . ] Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal «N» or coloured black. The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. GREEN & YELLOW E 13 A N L BROWN BLUE P1041 CORD CLAMP 8 USE Control panel ENGLISH H H J K L M N P 30º- 60º 30º- 60º 30º- 40º 30º- 40º A B B C C D F G 30º- 40º 60º- 95º 30º- 60º 30º- 60º 30º- 60º 1 1 Detergent dispenser drawer 2 Spin speed selector dial 2 34 5 6 7 4 ON/OFF button Depress this button to start the programme. Depress it again to stop the programme or to switch the machine off. Before selecting or changing an ongoing programme the machine must be switched off. This dial has the following positions: s 1200 = MAX to 650 = MIN For linen and cotton items you can select a spin speed from 1200 to 650 rpm. In the intermediate positions the machine will spin at decreasing speeds. 5 Temperature selector dial Turn this dial to select the washing temperature. Position = cold wash. 3 Quick wash button By depressing this button on programmes B, C and H the washing time will be reduced by approx. If using concentrated powder or liquid detergents, a programme without prewash must be selected. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. Follow the product manufacturer's recommendations on quantities to use. 1 2 3 4 soft medium hard very hard 26-37 15-21 more than 21 more than 37 11 ENGLISH Energetic programmes for cotton and linen Maximum load: 6. 5 kg Progr. Temp. Type of laundry Cycle description Possible options A B B+ C C+ D F G 30°-40° Extra prewash for heavy soiled laundry Prewash at 30°-40°C Short spin 60°-95° Whites (normally soiled) Wash at 60°-95°C 3 rinses Long spin Wash at 30°-60°C 3 rinses Long spin Wash at 30°-60°C 3 rinses Long spin Wash at 30°-60°C 3 rinses Long spin 3 rinses with liquid additives, if required Long spin 1 rinse with liquid additive, if required Long spin 30°-60° Whites, quick wash (lightly soiled) 30°-60° Coloureds (normally soiled) 30°-60° Coloureds, quick wash lightly soiled laundry Rinses Softener Spin Drain and long spin The temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry and degree of soiling. 12 Gentle programmes for synthetics, mixed fibres, delicates woollens Maximum load: 2 kg, woollens: 1kg Progr. Type of laundry Extra prewash for heavy soiled laundry (not for wool) Cycle description and Possible options A H H+ J K L M N P 30°-40° Prewash at 30°-40°C Short spin Wash at 30°-60°C 3 rinses Stop with water left in the drum Wash at 30°-60°C 3 rinses Stop with water left in the drum Wash at 30°-40°C 3 rinses Stop with water left in the drum Wash at 30°-40°C 3 rinses Stop with water left in the drum 3 rinses with fabric softener Stop with water left in the drum 1 rinse with fabric softener Stop with water left in the drum 30°-60° Synthetics (normally soiled) 30°-60° Synthetics, quick wash (lightly soiled) 30°-40° Delicate fabrics - Silk 30°-40° Woollens Rinses Softener Short spin Drain and short spin Drain Draining of water The temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry and degree of soiling. The water of the last rinse is not emptied out to avoid the fabrics from creasing. To empty out water select programme N or P. 13 ENGLISH i Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. 1. Place the laundry in the drum Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. [. . . ] Refer to relevant paragraph in "water drainage" section. Check that the drain hose is not squashed or kinked. You have selected a programme which ends with water in tub (the door locked light is on). The laundry is not evenly distributed in the drum. [. . . ]