User manual ZANUSSI FL726CN

[. . . ] WASHING MACHINE STIRALWNAÅ MAfiINA FL 726 CN A B B C D F G 40º- 95º 30º- 60º 30º- 40º H J K L M N P 30º- 60º 30º- 40º 30º- 40º FL 984CN 124972370 INSTRUCTION BOOKLET RUKOVODSTVO PO ÈKSPLUATACII YOUR NEW WASHING MACHINE This new washing machine meets all requirements for a modern washing of laundry with reduced consumption of water, energy and detergent. n The temperature selector dial allows you to choose personally the suitable washing temperature for your laundry. n Environment protection n Packaging recycling n The automatic cooling of the washing water from 95°C to 60°C before draining will prevent plastic pipes of your drainage system from being deformed. The anti-unbalance device ensures that the washing machine remains stable when spinning. Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). [. . . ] Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain. Before loading the laundry Never wash whites and coloureds together. Whites may lose their "whiteness" in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e. g. Button up pillowcases, close zip fasteners, hooks and poppers. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Remove hooks or tie them up in a bag or net. Maximum loads Recommended loads are indicated in the programme charts. General rules: cotton, linen: drum full but not too tightly packed synthetics: drum no more than half full 9 ENGLISH Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. Water hardness is classified in so-called "degrees" of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. Follow the product manufacturers' instructions on quantities to use. Use less detergent if: ­ you are washing a small load ­ the laundry is lightly soiled ­ large amounts of foam form during washing. Degrees of water hardness Degrees Level Characteristic German °dH 00-07 08-14 French °T. H. 00-15 16-25 Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc. ), the colour, washing temperature and degree of soiling. [. . . ] The anticrease option has been selected. The laundry is not evenly distributed in the drum. Too much detergent or unsuitable detergent (creates too much foam) has been used. Check whether there are any leaks from one of the inlet hose fittings. [. . . ]