User manual ZANUSSI FLD684

[. . . ] LAVADORA WASHING MACHINE FLD 684 - FLD 684 M 124976121 INSTRUCCIONES PARA INSTALACION Y USO INSTALLATION AND INSTRUCTION MANUAL i YOUR NEW WASHING MACHINE Environment protection s This new washing machine meets all requirements for a modern washing of laundry with reduced consumption of water, energy and detergent. s The temperature selector dial allows you to choose personally the suitable washing temperature for your laundry. The automatic cooling of the washing water from 90°C to 60°C before draining will prevent plastic pipes of your drainage system from being deformed. Packaging recycling s Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). >PE<= polyethylene >PS<= polystyrene >PP<= polypropylene s Ecological hints In order to obtain water and energy savings and Washing machine scrapping to protect the environment, we advice you to follow these instructions: s Whenever possible, wash the maximum load for the selected programme, without overloading the drum. [. . . ] tea cloths, towels, tablecloths, sheets. . . ) for normally soiled, colour fast garments (e. g. shirts, night dresses, pyjamas. . . . ) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e. g. net curtains), mixed laundry including synthetic fibres and woollens bearing the label «pure new wool, machine washable, non-shrink» (cold) 30°-40° Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain. Before loading the laundry Never wash whites and coloureds together. Whites may lose their "whiteness" in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e. g. Button up pillowcases, close zip fasteners, hooks and poppers. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Remove hooks or tie them up in a bag or net. Maximum loads Recommended loads are indicated in the programme charts. General rules: cotton, linen: drum full but not too tightly packed synthetics: drum no more than half full 30 Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach. [. . . ] The anticrease or no spin option has been selected. Redistribute the clothes inside the drum to allow the machine to spin. Too much detergent or unsuitable detergent (creates too much foam) has been used. Check whether there are any leaks from one of the inlet hose fittings. [. . . ]