User manual ZANUSSI FLS1002V

[. . . ] WASHING MACHINE Å fi FLS 1002 V INSTRUCTION BOOKLET 35. 292. 654/0 Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. [. . . ] Remove any residual marks from white fabrics with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk. Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. Water hardness is classified in so-called "degrees" of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. Follow the product manufacturers' instructions on quantities to use. Use less detergent if: ­ you are washing a small load ­ the laundry is lightly soiled ­ large amounts of foam form during washing. Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc. ), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: ­ powder detergents for all types of fabric, ­ powder detergents for delicate fabrics (60°C max) and woollens, ­ liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. Follow the product manufacturer's recommendations on quantities to use. Degrees of water hardness Degrees Level 1 2 3 4 Characteristic soft medium hard very hard German °dH French °T. H. 00-15 00-07 16-25 08-14 15-21 26-37 more than 21 more than 37 11 ENGLISH i International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. ENERGETIC WASH 95 Max. wash temperature 95°C DELICATE WASH 60 Max. wash temperature 30°C Hand wash 60 40 40 30 Do not wash at all BLEACHING Bleach in cold water Do not bleach IRONING Hot iron max 200°C Warm iron max 150°C Lukewarm iron max 110°C Do not iron A DRY CLEANING Dry cleaning in all solvents P Dry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113 F Dry cleaning in petrol, pure alcohol and R 113 high temperature low temperature Do not dry clean DRYING Flat On the line On clothes hanger Tumble dry Do not tumble dry 12 Maintenance Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. 1. Bodywork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. [. . . ] The bent piece has to be entered into the tube´s mouth in order to assure the support. . Aforesaid piece allows the hose to be fixed to the wall by means of an opening on the upper part and that way the hose does not move and its falling is avoided If the machine is permanently plumbed in, hook the end of the hose into a standpipe installed for the purpose. The standpipe must have an internal diameter of at least 40 mm in order that there is an air gap between the drain hose and the standpipe. Make sure, that it is designed in such a way, that the end of the drain hose cannot be covered with water. P0022 18 Max. [. . . ]