User manual ZANUSSI HM224W

[. . . ] You MUST read it carefully before installing or using the appliance. Installation q q When finishing loading or unloading close the door, as an open door can be a hazard. Isolate the appliance from the power supply and turn off the water supply after use. Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken. This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used. [. . . ] Crystal-ware and plastic objects, if not guaranteed dishwasher proof should be washed by hand. Certain types of glass can also become opaque after being washed several times in a dishwasher. A chemical reaction can occur between silver cutlery and stainless steel cutlery. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black, copper, pewter and brass tend to stain. If in doubt check with manufacturer of the item. When buying new dishes, ensure that they are dishwasher proof. For best washing results Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Arrange saucepans, cups and glasses etc. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible. For best results we recommend the use of Finish detergents, rinse aid and salt. POURING EASY PACK TION DOUBLE AC BRILLIANT SHINE FOR A N EW LIQUID GEL POWDER RINSE C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T DE15 14 Washing programmes Type of load Degree of soil Required push buttons Recommended quantity of detergent wash prewash Hot prewash Main wash up to 70°C 1 cold rinse 1 hot rinse Active dry Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Active dry Cycle description * 70° INTENSIVE SID 80 Heavy soil. Crockery, cutlery, pots and pans Normal soil. The start of the countdown will occur after about 6 seconds from the last pressure of a push button (programme or HALF LOAD push button). The countdown will decrease with step of 3 hours and you are informed of this by the indicator lights of the hours. 7. Close the dishwasher door 16 During the countdown the only indicator lights illuminated are the programme light and the light of the number of hours to the start of the programme. Once the delayed time has elapsed the programme will start automatically. It is possible to stop a countdown in progress or before it starts, simply pressing the DELAY START push button until the indicator lights of the hours are off. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Important!In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. 9. To cancel a programme in progress A programme in progress can be cancelled at any time. Press for about 3 seconds the push button of the running programme until all indicator lights are off. Only the ON-OFF indicator light will remain on once the programme has been cancelled. It is now possible to select a new washing programme. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 10. At the end of the washing programme The dishwasher will automatically stop and the phase indicator light end of programme will come on. [. . . ] To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. [. . . ]