User manual ZANUSSI TD523AL

[. . . ] You MUST read them carefully before installing or using the appliance. Installation This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. [. . . ] The selected delay time value (up to 20 hours) will appear on the display while selecting. The end cycle will be updated and shown on the relative position of the display. Note: To drain the water before starting the new cycle you have to cancel the programme and select the Drain programme. 12. Cancelling a programme Turn the selector dial to Off to cancel a programme which is running. Now you can select a new programme. Delay Start No 10. 55 Delay Start Start in 30 min 11. 25 Temp. Spin Options Change Exit Temp. Spin Options Change Exit 13. How to open the door during the cycle of a programme You can open the door, after having set the washing machine to PAUSE, provided the following conditions exist: 10. Start the programme Press the Start/Pause button. The message relevant to the phase that is in progress will be shown in the display. If you have chosen a delayed start, the washing machine will begin the countdown. · · · the washing machine is not in the heating phase beyond 55°C; the level of the water is not high; the drum is not turning. COTTON Washing 40°C Temp. 08. 30 12. 00 1200 Spin Options Change START/PAUSE Exit 11. How to change an option or a programme during its cycle If the programme has already started, before you make any change, you must pause the washing machine by pressing the Start/Pause button. It is possible to change any option before the programme carries it out. Changing a running programme is possible only by cancelling it and selecting a new programme. Turn the programme selector dial to Off and then to the new programme position. Start the new programme by depressing the Start/Pause button. If these requirements are met, when you pause the washing machine, the relevant message (Door openable) appears in the display the door can be opened. If you have used the machine to wash, rinse or spin only non-colour fast garments, there may be dye left in the sump. To ensure any subsequent wash is not contaminated with the dye, select and carry out a rinse and spin programme, without any garments, to ensure that any dye is removed from the sump. Once you have finished using the machine, you are advised to unplug it and turn off the water tap. Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc) as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature. White items should not be washed with coloured items. [. . . ] Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. If possible, always place the machine on a solid floor. P1197 Special conditions If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. [. . . ]