User manual ZANUSSI TE301

[. . . ] Only let bigger children work on the appliance under supervision. To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device. General safety The appliance may only be installed and connected by trained, registered service engineers, or competent persons. Built-in appliances may only be used after they have been built in to suitable built-in units and work surfaces that meet standards. In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric shock. [. . . ] Touch of both the cooking zones at the front simultaneously for 4 seconds. Display/Signal 3. The child safety device is switched off. 3 The child safety device can only be switched on and off, if no heat setting is set. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Control panel Switch appliance on Touch of both the cooking zones at the front simultaneously for 4 seconds. Display/Signal Until the appliance is next switched off, it can used as normal. After switching off the appliance, the child safety device is active again. 3 After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. 9 Automatic switch off Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered by objects (a pan, cloths, etc. ) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. Cooking zones If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. appliance is switched off partly covered by objects. The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc. ) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. The sealant seals the appliance to the work top with no gap. Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened. Make electrical mains terminal free of voltage. [. . . ] 135, 90429 Nrnberg Mustame tee 24, 10621 Tallinn Carretera M-300, Km. 29, 900 Alcal de Henares Madrid Addington Way, Luton, Bedfordshire LU4 9QQ 4 Limnou Str. , 54627 Thessaloniki Slavonska avenija 3, 10000 Zagreb Long Mile Road Dublin 12 C. so Lino Zanussi, 26 - 33080 Porcia (PN) Kr. Barona iela 130/2, LV-1012, Riga Zirmn 67, LT-09001 Vilnius Rue de Bitbourg, 7, L-1273 Hamm H-1142 Budapest XIV, Erzsbet kirlyn tja 87 Vennootsweg 1, 2404 CG Alphen aan den Rijn Rislkkvn. 2 , 0508 Oslo Herziggasse 9, 1230 Wien ul. [. . . ]