User manual ZANUSSI TL753C

[. . . ] If the machine does not drain and/or does not spin: is the drain hose squashed or bent?If there is water on the floor: too much detergent or unsuitable detergent?The formation of foam can cause water leaks. is one of the joints or the tap leaking? [. . . ] According to the models, complete the drain of the appliance by taking away the yellow cap and by extracting the little hose located on the left of the filter (fig. Turn the filter anticlockwise and clean it thoroughly with running water (fig. Refit the filter in the guides and turn it clockwise. 3 Refit the little hose and the yellow cap, then close the flapdoor. 2 11 INSTALLATION Operating instructions 1. Place the laundry in the drum lift up the lid of the machine open the drum with your two hands by pressing the button A and the two flapdoors till they disengage introduce the laundry into the drum ; close the drum and the lid of the machine 6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help or the indications of the programme table, according to the fibers and the fastness of the colours. Unpacking The parts protecting the inner components of the machine during transit are red. They must all be removed before using your machine for the first time. These parts and their securing means should be kept in case the machine has to be transported again. Open the lid of the appliance and remove the polystyrene wedge which blocks the drum. Close the lid (fig. 1). Fig 1 Fig 2 7. Select the programme Choose the programme according to the nature and the degree of soil of the laundry. Add the bleach agent You may use a bleach agent in all the washing programmes. However, make sure that the fabric withstands the treatment. Bleach is automatically washed down into the drum. Pour 1/4 to 1 glass of 12° chl bleach into compartment marked before switching the machine on. Make sure that the level of the liquid never exceeds the MAX level. D Fig 5 4. Add the fabric softener Pour the softener, if required, into the compartment marked . On the back part and with the spanner, remove the two red loosened spacers (C) (fig. 4). The holes which are now visible must be closed with the plugs (D) provided with the appliance (fig. Please ensure that these parts have been removed from the machine and keep them in case of next transport (fig. 6). Be careful : when the machine is installed on carpeted floor, ensure that the carpet do not obstruct the openings, located at the base of the machine, which are provided for ventilation. 5. Press the half load pushbutton " " if required. 10 3 Electrical connection Before you fit the plug into the wall socket, check the following points : 1) That the supply voltage of the domestic wiring system does not fluctuate by more that 10%, plus or minus, from 230 V. [. . . ] The washing powder should be placed in the appropriate compartments of the dispenser drawer before starting the programme. Special detergents are availaible for coloured and delicate fabrics and for wool. <<Concentrated>> powder detergents Pour the concentrated powder detergent into the main wash ( ) compartment. Avoid selecting programmes including prewash when concentrated detergents are used. [. . . ]