User manual ZANUSSI TLS591C

[. . . ] Ensure the appliance does not stand on its electrical supply cable. All packaging and transit bolts must be removed before use. Use Unplug the appliance and turn off the water supply after use. Before carrying out any cleaning or maintenance disconnect the appliance from the electrical supply. This product should be serviced by an authorised service engineer. [. . . ] Wash full loads Pre-treat stains and then wash at a lower temperature. Only use the advised quantities of detergent and fabric softener. WHICH DETERGENT ? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates. Whites We recommend the Ariel product range which is biological and designed to provide excellent cleaning and stain removal even at low temperatures. Non Biological If you prefer to use a non biological detergent, which does not contain enzymes we recommend Fairy. Fairy provides good cleaning and stain removal. Coloureds For coloured items you should use a detergent which is designed to clean while maintaining the original colour. Ariel Color does not contain bleach and therefore helps to preserve colours. Delicate items When washing delicates such as woollens, you should use a product which is specially designed to care for fine fabrics. Dreft Automatic is suitable for woollens and other delicates. Laundry Bleach For additional stain removal you may wish to use a product such as Ace Gentle Bleach which is used in addition to your chosen detergent. SYMPTOM The machine does not start up POSSIBLE CAUSE The ON/OFF button has not been depressed. The lid is not properly closed The appliance is not plugged in There is no electricity supply from the wall socket The programme selector dial is not correctly positioned The water is not turned on The water supply has been cut off The inlet hose is kinked The water pressure is too low The water inlet filter is clogged The machine empties as it fills The end of the drain hose is too low The end of the drain hose is submerged in water The machine does not drain or spin The Rinse Hold button has been pressed The drain filter is clogged The drain hose is bent The drainage system pipes are blocked The drain hose extension is incorrect The wash load is unbalanced Too much detergent Unsuitable detergent The detergent dispenser is blocked The end of the drain hose is not correctly positioned The bung of the drain filter hose is not in position The machine vibrates or is noisy The internal packing and/or transit bolts have not been removed The wash load is unevenly distributed The machine is overloaded The safety device has locked it Water in the tub SOLUTION Press the ON/OFF button Close the lid Plug in the appliance Check the fuse Turn the selector dial to the required programme Turn on the water Wait until the water supply is restored Straighten the inlet hose Consult a qualified plumber Clean the filter Position the drain hose at the correct height (between 60 and 90 cm) Re-position the drain hose so it is not submerged Release the Rinse Hold button Clean the filter Straighten the hose Consult a plumber Consult a plumber Reload the washing and select a spin programme Reduce the quantity of detergent Use only detergent for automatic washing machines Clean the dispenser Re-position the drain hose Refit the drain hose bung Remove internal packing/ transit bolts See hints and tips section Observe the maximum loads quoted for the programme Wait 2 minutes after programme end before opening the lid Select a drain or spin programme The machine does not fill The machine leaks or overfills The lid does not open 15 SERVICE AND SPARE PARTS If you require an engineer or assistance with your appliance please call our Customer Care Department on: 01635 521313 When you call please state that you have a field trial machine, model number TLS591C. CUSTOMER CARE DEPARTMENT For general enquiries regarding your appliance or for further information on Zanussi products, please contact our Customer Care Department by letter or telephone: Customer Care Department Zanussi Zanussi House Hambridge Road Newbury Berkshire RG14 5EP Tel: 01635 521313 Fax: 01635 42970 16 PEACE OF MIND FOR TWELVE MONTHS Standard guarantee conditions We, Zanussi Limited, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's instructions The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us All service work under this guarantee must be undertaken by a Zanussi Service Force Centre Any appliance or defective part replaced shall become the Company's property This guarantee is in addition to your statutory and other legal rights Home visits are made between 8. 30 am and 5. 30 pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged. Exclusions This guarantee does not cover: Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements Products of Zanussi manufacture which are not marketed by Zanussi Limited European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products This guarantee relates to you and cannot be transferred to another user Your new home is within the European Community (EC) or European Free Trade Area The product is installed and used in accordance with our instructions and is only used domestically, i. e. a normal household The product is installed taking into account regulations in your new country Before you move please contact your nearest Customer Care centre, listed below, to give them details or your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Germany Italy Sweden UK Senlis Nurnberg Pordenone Stockholm Newbury +33 (0)3 44 62 29 99 +49 (0)911 323 2600 +39 (0)1678 47053 +46 (0)8 738 79 50 +44 (0) 1635 521313 17 FOR THE INSTALLER Technical Specifications Height with panel Height without panel Width Depth Power supply voltage / frequency Total power absorbed Heater rating Water pressure minimum maximum Maximum load Cotton Synthetics/delicates Wool Maximum spinning speed Electrical consumption (washing at 60°C) Dimensions 895 mm 850 mm 397 mm 600 mm 230 V - 240 V / 50 Hz 2300 W - 2400 W / (10 A) 1950 W 5 N/cm² (0, 5 kg/cm2) 80 N/cm² (8 kg/cm2) 4, 5 kg 2 kg 1 kg 1000 rpm 1, 2 kWh This appliance complies with the following EC Directive : - 72/23/EEC of 19. 02. 1973 - Low-Voltage Directive - 89/336/EEC of 03. 05. 1989 (including Amentment Directive 92/31/EEC) - EMV Directive. Installation Unpacking Before installing the machine the packing and transit bolts must be removed. Please retain the packing and transit bolts for re-use in case the machine is to be transported again. Remove the polystyrene base, by turning the appliance one quarter turn. 1) Open the lid and remove the polystyrene block securing the drum. 2) Using a spanner remove the two transit bolts (A) (Fig. 3) The holes which are now visible must be filled with the plugs (B) provided. [. . . ] The rating plate is located at the back of the appliance. The appliance is supplied with a 13amp plug supplied, a 13amp ASTA approved (BS1362) fuse must be used. Should the plug need to be replaced for any reason. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow Blue Brown : Earth : Neutral : Live E N Green and yellow 13A The wire coloured green and yellow must be connected to the terminal marked with the letter "E" or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal "N" or coloured black. [. . . ]