User manual ZANUSSI ZBM879SB

[. . . ] This appliance has been designed for cooking edible foodstuff only and MUST NOT be used for any other purposes. It is dangerous to alter the specification in any way. For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire. [. . . ] The pilot light to the left of symbol will come on. -- Allow the oven to run empty for approximately 45 minutes. During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing. Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water. Before cooking for the first time, carefully wash the shelf and the dripping pan. To open the oven door, always catch the handle in its central part (Fig. Programming HOW TO SET THE MINUTE MINDER -- Press button 7 to select the Minute Minder Function. The Minute Minder pilot light will flash and the control panel will display 0. 00. -- Press button 5 or 6 to select the required time. -- After the setting is carried out, the Minute Minder will wait 3 seconds and then start running. -- When time is over, an acoustic alarm will be heard, while control panel will display 0. 00 in flashing numbers. -- To switch off the acoustic alarm, press any button. Neither oven functions nor temperatures can be selected. To unlock the oven: -- Press buttons 4 and 5 at the same time and keep them pressed for about 3 seconds. The flashing dot after the numbers will come off. The oven can now be operated. 64 4. Using the Oven Shelf supports The oven has four shelf levels. The shelf positions are counted from the bottom of the oven as shown in figure 2. Shelf levels 1, 2 and 4 are fitted with telescopic shelf supports, to allow en easier operation when inserting or removing the shelves. Pull the right and left hand telescopic shelf supports completely out, as shown in figure 3. Place the shelf or the grill pan on the telescopic shelf supports, then gently push them all inside the oven (Fig. Do not attempt to close the oven door if the telescopic shelf supports are not completely inside the oven. This could damage the door enamel and glass. 4 3 2 1 Fig. [. . . ] Technical Assistance and Spare Parts If after the checks listed in the previous chapter, the appliance still does not work correctly, contact your locals Zanussi Service Centre, specifying the type of malfunctioning, the appliance model (Mod. ), the product number (Prod. No. ) marked on the identification plate. This plate is placed on the front external edge of the oven cavity, as indicated in Fig. 10 Original spareparts, certified by the product manufacturer and carrying this symbol are only available at our Service Centre and authorized spareparts shops. MOD. [. . . ]