User manual ZANUSSI ZC246R1

[. . . ] . page Reversing the quick-freezing compartment door . . page 2 WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety. [. . . ] The manufacturer declines to accept any liability if this accident-prevention procedure is not followed. This appliance complies with EEC directive number 87/ 308 of 2/6/87 relative to radio interference suppression. This appliance complies with the following E. E. C. Directives: - 73/23 EEC of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. Location Place the appliance as far away as possible from sources of heat, e. g. radiators, heaters, direct sunlight, etc. The best results are achieved with a room temperature of between +18°C and +43°C. Make sure that there is nothing hindering air circulation at the back, bottom or top of the appliance. To achieve the best performance, the top of the appliance ­ if set under a wall cabinet ­ should be at least 5 mm away from the base of the cabinet (Figure 1-A). However, the appliance should ideally not be installed underneath wall cabinets (as shown in Figure 1-B). It can be positioned with its sides set tight against adjacent furniture as long as air is able to circulate freely behind and above it. One or more adjustable feet mounted on the base of the appliance make it possible to set it perfectly level. Introduce the plug (G), which is delivered with the appliance, into the hole left free on the opposite side. Re-assemble the ventilation grill. I H D276 5 USING YOUR FREEZER This freezer has been marked with the symbol, which means that it is suited to the freezing of fresh foods, the conservation of frozen foods and the production of ice-cubes. The control panel (Fig. Thermostat knob D E Starting Insert the power supply plug into the nearest wall socket (the function indicator light (A) will light up indicating that the freezer is receiving electrical input). Turn the thermostat knob (E) to the right to a medium setting (the temperature alarm light (C) will light up). For the satisfactory conservation of frozen foods, the freezer's internal temperature must be lower than ­18°C. Wait until the temperature alarm light (C) turns off when the optimum temperature has been reached. Thermostat settings may be modified according to the surrounding room temperature, the location of the freezer and the frequency of door openings, etc. To turn off the freezer, turn the thermostat knob to the «O» position. The temperature alarm light (C) The temperature alarm light turns on automatically whenever the temperature within the freezer rises above a certain value which might endanger satisfactory long-term conservation. It is perfectly normal for the temperature alarm light to remain lit up for a short time after the freezer is initially turned on. It will remain lit up until the optimum temperature for the conservation of frozen food is attained. Quick-freezing For quick-freezing, turn the N/S knob (D) to the «S» symbol. The quick-freezing indicator light (B) will then light up. 6 Freezing food Set the freezer to quick-freezing operational status. [. . . ] Foods to be frozen must be enclosed in air-tight sacks or containers especially indicated for this purpose. Close these sacks or containers tightly to eliminate all air. Never place bottles or cans of carbonated beverages in the freezer. Never fill the freezing sacks or containers with covers to the brim. [. . . ]