User manual ZANUSSI ZCG7690XL

[. . . ] ZCG 7690 INSTRUCTION BOOKLET Introduction ZCG 7690 Introduction This gas appliance has been designed an necessary British Standards. It also carr appliance complies with European Council Di It is important that you understand how appliance properly before you use it for the fir We have written this booklet with your booklet thoroughly before you use the applia safe place so that anyone who uses the appl booklet on with the appliance if you give or se For your safety This appliance is not intended to be ope external timer or separate remote control This appliance is designed for domestic must not use it for any other purpose. Keep children, babies and toddlers away all times. The installation instructions tell you how fitted. [. . . ] Aluminium based saucepans can leave shiny metal marks on the pan supports. Clean the pan supports regularly to remove the marks using a mild abrasive like 'Cif' with a soft scourer. For more stubborn marks you can use a soap-filled pad such as 'Brillo'. After cleaning the appliance parts, dry them thoroughly before you put them back. When replacing hotplate burner parts 1. Crown to body (Do not try to force the crown on to the body). Make sure that the hole in the crown is over the electrode. Check that the two longer location pegs sit in the slots in the body. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side. Cap to crown Place cap centrally on the top of crown (enamel side up). Move sideways and front to back to check the cap is properly fitted. Check for ignition If a burner will not light then you need to check the crown and cap positions. 29 Care and cleaning Care and cleaning ZCG 7690 The grill Do not clean the grill burner itself. The burner is designed to be self cleaning. Cleaning the grill may cause the holes in the burner to become blocked preventing it from operating correctly. Please note that due to the nature of stainless steel the grill burner may tarnish through use over a period of time. This is quite normal and is not a fault on the appliance. Clean the area around the grill frequently using hot soapy water. After use you can soak the pan for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. Clean the grill shelf using hot soapy water. Mild abrasives can be used if necessary. The grill and oven furniture Clean the grill and oven furniture frequently using hot soapy water. After use you can soak the grill pan for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. Clean the shelf, grill pan grid and handle using hot soapy water. Mild abrasives can be used if necessary. [. . . ] After 1 minute check that the flame covers the full width of the burner and is stable. Set the oven thermostat to Mk. 2, close the oven door and check that after about 10 minutes the flame has reduced in size. Turn off the thermostat and check that the oven flames go out. 12. AUTOMATIC OPERATION Having set the clock up as described above, turn the left hand knob to the 'Cook' position and set the right hand knob to show a cooking time of two minutes (0. 02). [. . . ]