User manual ZANUSSI ZDS699EX

[. . . ] DISHWASHER ZDS 699 EX 152987 58/4 INSTRUCTION BOOKLET UK Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Filling with salt Rinse aid Using your appliance Loading your appliance The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Protection against flooding Service and spare parts Customer Care Department Guarantee conditions Zanussi Service Force Hints for test centres Technical specifications 3 4 4 7 7 8 9 10 10 10 11 12 12 13 14 15 16 18 18 18 19 19 19 19 20 21 21 21 22 23 25 25 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Building-in 26 26 27 28 29 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 2 IND18en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] Pressing the "programme selector" push button while the programme is running will display the number of the current programme. If the door is opened during the run of the programme the current phase will be interrupted and the digital display will show the number of the programme. The indicator light of the interrupted phase will start to flash and the indicator light "open door" will illuminate. Once the door is closed the programme will start from the point where it was interrupted. 2. Press the On/Off push button The display will show the last selected programme and the corresponding phase indicator lights will illuminate. If the door is open also the "open door" indicator light will illuminate. ab- 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary. 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. 5. Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser. Close the detergent dispenser lid. 6. 7. Close the dishwasher door 16 SEQ06en 8b. Setting and starting the programme with "delay start" Once a programme and required options have been selected to use DELAY proceed as follows: Press the DELAY push button. The digital display will show "h 0". Press the button again to select the number of hours by which you wish to delay the programme start (up to a maximum of 12 hours). The delay start will not modify the settings made previously . To set the time setting to zero press the DELAY push button until "h 0" appears in the digital display. The digital display shows the delay time required before the start of the programme. The start of the countdown will be confirmed by the flashing "h" in the digital display. Once the delayed time has elapsed the programme will start automatically. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Important!In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 9. To cancel a programme in progress Press the "START" pushbutton for 5 seconds to cancel the setting or the running of the current programme. All the indicator lights will turn off and 3 horizontal lines will appear in the digital display. After 5 seconds the dishwasher will return to setting mode. [. . . ] Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 28 COLUKen Building-in This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. 818 - 878 596 0 59 x ma The recess height may be anywhere between 820 and 880 mm from the floor as the dishwasher incorporates adjustable feet (max 60 mm). A distance of 2 mm should be allowed between the top of the dishwasher and the counter top. - 600 + II123 Adjusting the height of the appliance To adjust the height proceed as follows: 1. [. . . ]