User manual ZANUSSI ZDT6041

[. . . ] DISHWASHER ZDT 6041 152964 67/0 INSTRUCTION BOOK UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water outlet hose connection Electrical connection Hints for test centres 3 3 3 4 4 5 5 6 6 7 7 7 7 8 8 9 10 11 12 13 13 13 13 13 14 15 15 16 17 17 17 17 17 18 18 19 Technical specifications Dimensions Width Height Max depth Max depth with open door 59. 6 cm 81. 8 - 87. 8 cm 55. 5 cm 114 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. [. . . ] When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Set and start of the programme Turn the programme selector dial clockwise until the letter of the programme you wish to select corresponds with the programme marker on the control panel. Depress the On/Off push button and close the door. Interrupting a washing programme in progress Interrupt a washing programme in progress ONLY if it's absolutely necessary. Hot steam may escape when the door is opened. Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted. 5. End of the washing programme The dishwasher will automatically stop. Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Switch off the dishwasher by pressing the On/Off push button, the On/Off indicator light turns off. 6. Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may appear on the sides and door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 12 Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc. . . . ). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash programme without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale. Put the filter combination in place and lock by turning the handle clockwise to the stop. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Electrical connection This appliance must be earthed. [. . . ]