User manual ZANUSSI ZDT6255

[. . . ] DISHWASHER ZDT 6255 152964 79/1 INSTRUCTION BOOK UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Audible signals Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 4 5 6 6 7 8 9 9 9 10 10 10 11 12 13 14 15 15 15 15 15 16 18 18 19 Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water outlet hose connection Electrical connection Hints for test centres 20 20 20 20 20 20 21 22 Technical specifications Dimensions Width Height Max depth Max depth with open door 59. 6 cm 81. 8 - 87. 8 cm 55. 5 cm 114 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. [. . . ] Crockery, cutlery, pots and pans INTENSIVE 70°c Hot prewash Main wash up to 70°C 2 warm rinses 1 hot rinse Drying Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Main wash up to 60°C 1 hot rinse Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Main wash up to 45°C 1 warm rinse 1 hot rinse Drying 80 - 90 1, 7 - 1, 9 23 - 25 Normal 65°C Normal soil. Crockery, cutlery, pots and pans Fresh soil. Crockery and cutlery NORMAL 65°c 95 - 105 1, 3 - 1, 5 19 - 21 (1) Quick 30 min. QUICK 30 MIN. 30 0, 8 9 (2) Bio 50° Normal soil. Delicate crockery, delicate china and glassware BIO 50°c 155 - 165 0, 95 - 1, 05 13 - 15 Crystal 45° CRYSTAL 45°c 65 - 75 0, 8 - 0, 9 14 - 16 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. (2) (3) 13 Starting a washing programme In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. 6. To cancel a delay start in progress Open the dishwasher door and press the DELAY START option push button until the indicator lights corresponding to the hours (3h, 6h, 9h) are off. The selected washing programme will start automatically after the closure of the door. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off push button All the indicator lights of the programme selection push buttons illuminate (setting mode). 7. End of the washing programme The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. Hot steam may escape from the appliance when opening the door immediately after the end of the programme, therefore, open the door carefully. The END OF CYCLE indicator light is illuminated. The indicator light of the programme just ended remains on. Switch off the dishwasher by pressing the On/Off push button. 4. Setting and starting the programme a) To select a programme, press the programme push button of the washing programme you wish to select (see "Washing programmes" chart). The corresponding indicator light remains illuminated while the other programme push buttons indicator lights turn off. b) To select the delay start of the programme, press the DELAY START option push button until the indicator light corresponding to the chosen hours flashes (3h, 6h or 9h). [. . . ] The locknut must be correctly fitted to avoid water leaks. NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. [. . . ]