User manual ZANUSSI ZDT6894

[. . . ] DISHWASHER ZDT 6894 COP04 152975 51/0 INSTRUCTION BOOK UK Contents Important safety information Description of the appliance The control panel Before use Setting the water softener Filling with salt Rinse aid Use of detergent Using your appliance Loading your appliance Adjusting the height of the upper basket Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Protection against flooding Service and Spare Parts Customer Care Department Guarantee Conditions Hints for test centres Installation instructions Water supply connections Water outlet hose connection Electrical connection 3 3 4 5 5 5 6 6 7 7 8 9 10 11 12 12 12 12 12 12 12 13 14 14 14 15 16 17 17 17 18 Technical specifications Dimensions Width Height Max depth Max depth with open door Voltage 59. 6 81. 8 - 87. 8 55. 5 115. 9 cm cm cm cm Electrical connection Motor rating during wash Power of heating element Overall power Water supply pressure 220/240 V - 50 Hz 200 W 2100 W 2300 W 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Minimum Maximum Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] Delicate china and crockery 25 g 5g 10. Crystal glass and delicate glassware 25 g 5g **** 11. Crockery and cutlery This is a programme both designed to heat plates before serving or remove dust from dishes which have not been used for a long time 20 g / / / 1 hot rinse * Ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of the programme has been prolonged. ** *** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may reuse them promptly **** Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). Characterised by a duration of about 30 minutes and a washing temperature of 60°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the a daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 10 Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). The start of the programme is shown in the digital display and will decrease from hour to hour. The progression of the countdown will be confirmed by a flashing dot after the number in the digital display. The opening of the door will not stop the countdown. Once the delayed time has elapsed the programme will start automatically and in the digital display will appear the duration of the programme. To cancel a delay start in progress, open the door and press the Cancel push button. The delay start will be cancelled without modifying the previous selection of the washing programme with relative options. In the digital display will appear the number of the programme. 2. Press the On/Off push button The display will show the last selected programme. 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary. 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. [. . . ] The locknut must be correctly fitted to avoid water leaks. Do not use, for the connection, old hoses which have been used in another appliance. Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. [. . . ]