User manual ZANUSSI ZE1001IS

[. . . ] Prior to installation Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer. It is dangerous to alter the specifications or attempt to modify this product in any way. [. . . ] At the end of the Appliance Life When disposing of your appliance use an authorised disposal site. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. 3 Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside. Safety precautions for isobutane Warning The refrigerant isobutane (R 600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance. The Appliance and the Environment This appliance does not contain gases which could damage the ozone layer. The packaging used on this appliance marked with the symbol is recyclable. Keep this instruction book for future reference and ensure it is passed on to any new owner. 4 Cont ents Instructions for the User Guide to use the instruction book Important Safety Instructions Instructions for the User General Information Description of the Appliance Using the Appliance Before Use To Start the Appliance Thermostat Control Hints for storage Storage Shelves Hints and Tips Food Storage Energy Saving Advice Maintenance and Cleaning Internal cleaning External cleaning Changing the Light Bulb Defrosting Your Appliance When the appliance is not in use Something Not Working 2 3 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 8 9 9 9 Instructions for the Installer Technical Specifications Installing the Appliance Transportation, Unpacking Cleaning Location Ventilation Requirements Levelling Door Reversal Electrical Connection Storage Chart 10 10 10 10 10 11 11 11 12 13 5 INS TR UCTIONS F OR THE USER General information This appliance is designed for the refrigeration of food in a domestic home. It is advisable to periodically clean the refrigeration system at the back of the appliance with a duster or vacuum cleaner. Maint enance & Cleaning Before any maintenance of cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY SUPPLY. External Cleaning Wash the outer cabinet with warm soapy water. There are sharp edges on the underside of the product so care should be taken when cleaning. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5 ml to 0. 5 litre of water). Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol. Clean the drain hole of the water trough at regular intervals and ensure that the drain hole is clear at all times. If blocked carefully clear using a piece of flexible curtain wire inserted into the drain outlet to remove the blockage. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. Changing the Light Bulb Should the light fail to work you can change it as below: Disconnect the appliance from the electricity supply. Remove the lamp cover retaining screws, then take the lamp cover off in the direction of the arrow and the bulb can be changed. (Type of the bulb: 230 V, 15 W, E 14 thread) After changing the bulb replace the lamp cover, and retaining screws and reconnect the appliance to the electricity supply. 8 Defrosting Your Appliance The fridge compartment is defrosted automatically, when the motor stops. Defrost water from the cooling plate runs out of the drain and onto a tray on the motor compressor where it evaporates. Droplets of water on the cooling plate during defrosting are quite normal and will freeze on the plate afterwards. When the appliance is not in use When the appliance is not in use for long periods disconnect from the electricity supply, empty all of the food and clean the appliance, leaving the door ajar to prevent unpleasant smells. Something Not Working If the appliance is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre. [. . . ] In-guarantee customers should ensure that the above checks have been made, as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. The temperature in the appliance is too low Excessive frost and ice has built up The appliance is noisy. The thermostat control knob is set too high. The appliance is not level. Water under the salad drawer. The drain hole is blocked. If after the above checks your appliance still does not operate correctly, contact your local Service Force Centre. Slide the worktop towards the rear and lift clear of the appliance. Remove the 2 upper hinge plate retaining screws. Door Reversal If required the opening direction of the door can be changed as follows: To reverse the bottom hinge assembly proceed as follows: Disconnect the appliance from the electricity supply. Tilt the appliance backwards, resting the top edge of the appliance on a stool or something similar. [. . . ]