User manual ZANUSSI ZGF78ICX

[. . . ] GAS HOB ZGF 78 ICX INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance CZ HR RO SK SLO RU Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. About Installation, Cleaning and Manteinance · It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Ensure a good ventilation around the appliance. [. . . ] In models provided with electric ignition, this feature is obtained through a ceramic "candle" and a metal electrode (Fig. Keep these components well clean, to avoid difficult lighting, and check that the burner crown holes (lett. B) are not obstructed. YES Cast Iron Pan Supports The hob has cast iron pan supports. They are fair heavy and could damage the hob or your kitchen furniture if you let them fall down. To keep the pan supports in the correct position, they are hooked into hinges at the back of the hob. Thanks to these hooks, you can lift the pan supports for easier cleaning. When removing the pan supports, lift them up as shown in Fig. Never turn the pan supports on the hinges, this could damage them (Fig. Keep the left pan support on the appropriate hook of the right pan support, as shown in Fig. This keeps the pan supports fixed in place when the central burner is in use. Wash the pan supports using hot soapy water. If necessary, a paste cleaner or a soap impregnated steel wool pad can be used with caution. FO 2238 Fig. 3 4 Periodic Maintenance Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. To ensure the good operation of the hob and its safety features, it is necessary that the taps are periodically lubricated. The periodic lubrication of the taps must be carried out by qualified personnel, which you must refer to also in case of malfunctioning. When removing the cast iron pan supports, lift them up as shown in Fig. Never turn the pan supports on the hinges as shown in Fig. 3, since this could damage them. FO 2292 Fig. 4 Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we recommend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem, the appliance model (Mod. ), the product number (Prod. No. ) marked on the identification plate. [. . . ] To install the lid onto the hob, proceed as follows: a. Remove the right and left hand grid blocks fitted to the back of the hob, by unscrewing the relevant screws (Fig. Fit the lid hinge blocks onto the hob, using the original screws, ensuring that the relevant shims are fitted between the hinge blocks and the hob (Fig. Fit the left hand lid hinge (marked S) into the hinge block (Fig. 12); d. [. . . ]