User manual ZANUSSI ZK87/46EFS

[. . . ] m Any electrical work required to install the appliance should be carried out by a qualified electrician or competent person. m Maker sure that the cable is not trapped underneath the appliance, nor touches the motor. m Repairs carried out by inexperienced persons may cause injuries or serious malfunctioning. m The appliance should be left for at least 4 hours after installation before it is turned on in order to allow the refrigerant to settle. [. . . ] Once finished make sure that all joints close perfectly well all around the door and check that the internal light turns off when the fridge door closes. 8 23 Regulation and Control I Freezer control knob Setting the knob at 1 will give you a minimum freezing temperature. Setting 7 will give you the maximum freezing temperature. For normal use set the freezer at a middle setting (The exact setting will depend on your usage of the freezer). 4 Fast Freeze 2 The door alarm If either of the doors is left open for a prolonged period of time the door alarm will start to beeb and a red flashing light will go on. Pressing the alarm button will switch the buzzer off and the light will stop flashing, but remain red. If you simply shut the doors, this will also switch off the door alarm buzzer and the light automatically. This feature is designed to help you freeze your food more quickly. It is best to press the fast freeze button before going shopping (preferably 3 houres in advance) in order to have the freezer in an optimal state to put your food in. If you havent pressed the button prior to purchasing your food you can of course put your new purchases in, but it will take longer for the freezer to cool down. (If you put a lot of fresh food into your freezer you could cause the temperature alarm to go on. For further information see sention on temperature alarm). 5 On/Off button 3 Temperature alarm If the internal temperature has risen significantly the temperature alarm will sound and the light will start to flash. To switch the alarm off simply press the temperature alarm button. B) If the freezer is not fully loaded the temperature will rise more quickly. If thawing has not started proceed as in point A. C) If the temperature has risen sufficiently the temperature alarm will sound and the temperature indicator will blink. You should: Check that the doors are shut. If they are not, you will hear also the door alarm. Check that you havent overloaded the fridge/freezer with a large amount of new food. Check that there hasnt been a long power cut. Check that the fridge/freezer appears to be working properly and isnt broken. You should switch the alarm off by pushing the appropriate button. If it continues to come back on it is likely that there is a problem with the product. Advice then to the Technical Oficial Service. [. . . ] Doors do not close. The appliance is not properly levelled. Weight surpasses the storage limit of the door shelf. Doors not properly aligned. Level properly. Shut doors more gently. Spread weight more evenly or take some products out. [. . . ]