User manual ZANUSSI ZP3736

[. . . ] It is imperative that this information is observed. 1. Numbered instructions guide you step by step through operation of the appliance. . . . 3 2 After this symbol you will find supplementary information on operating and practical use of the appliance. Tips and instructions for the economical and environmentally sound use of the appliance are marked with this symbol. The instructions on use contain information on dealing with problems yourself if any faults occur - see the section "What to do if". [. . . ] ­ !, lowest heat setting ­ ), highest heat setting ­ a, automatic warm up function. With the heating-up function (a), the cooking zone operates for a certain time at full power and automatically switches back to the heat setting selected. The duration of the automatic heating-up boost depends on the selected further cooking stage. Select the required cooking zone with the cooking zone sensor keys. The decimal point in the associated display field illuminates. Set the cooking stage ) with the + or --sensor fields. a now lights up in the cooking stage display. Next, press the sensor field - and set to the required continued cooking stage , , to (. The cooking setting chosen is then displayed. After 5 seconds, a appears again in display instead of the heat setting. The heat setting is displayed again at the end of the automatic warm up time. Locking the appliance or the cooking zones (child-proofing) 3 Locking the appliance The locking key enables you to completely lock the appliance so that no accidental settings can be made. 1. If you want to switch off the timer before the programmed cooking duration has ended, press the key - until "00" is displayed. The cooking zone remains switched on until it is switched off manually. To switch off the cooking zone quickly, press the keys for the corresponding cooking zone: The selected heating power setting and a decimal point are displayed. The timer is not switched off, but no longer has any influence on the cooking zone. 3 Note: The heat settings are only adjustable for the respective selected zones. This is indicated by a decimal point in the display. 10 Power function The Power function enables you to increase the output of the two front cooking zones for 10 minutes. With this function, you can, for example, bring a large quantity of water rapidly to the boil or brown meat very well. Activating the Power function: After you have selected one of the two front zones, directly press the key is displayed. If "H" should be displayed before the function "P" can be activated, press the key + or - so that 0. or a heating power setting is displayed, and press the key P. After 10 minutes, the power is automatically switched back to the stage "9" P is no longer displayed. The Power function can be interrupted as follows: · Press the key "P". This power increase with the Power function is only possible because part of the output is diverted to the other cooking zones at the back. [. . . ] We accept no liability for accidents or incidents caused by the lack of or a defective earth. The mains cable must not be extended under any circumstances. The mains connections (wall sockets) must be near to the cooking field being installed. The appliance must be disconnected from the mains when a qualified technician is carrying out repairs. [. . . ]