User manual ZANUSSI ZRME38FW1

[. . . ] WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING: Do not damage the refrigerant circuit. [. . . ] Your fridge may have a smell when it is operated for the first time. This is normal and the smell will fade away when your fridge starts to cool. No-frost refrigerators differ from other static refrigerators in their operating principle. In normal refrigerators the humidity entering the refrigerators due to opening the door and the humidity inherent in the food causes freezing in the backside of air duct. To defrost the frost and ice in the backside of air duct, you are periodically required to turn off the refrigerator, place the food that needs to be kept cooled in a separately cooled. The situation is completely different in no-frost refrigerators. Dry and cold air is blown into the refrigerator compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost refrigerators allows you ease of use, in addition to its huge capacity and stylish appearance. This button allows setting temperature of the fridge. In order to set values for fridge partition, press this button. In case of a problem within the fridge, the alarm led will release red light. Press temperature set button until super cooling light comes on. Super cooling led will light during this mode. For optimal appliance performance in maximum cooling capacity, set the appliance to active super cooling mode 6 hours before you put the fresh food into the fridge. During this mode: If you press temperature set button, the mode will be cancelled and the setting will be restored from 2. The super cooling mode will be cancel automatically after 6 hours or when cooling sensor temperature falls below 2 °C. The initial temperature of the setting display is 5 °C. Every time you press the button, the setting temperature will increase. If you press fridge setting button until super cooling symbol is displayed on your fridge. Settings display and you do not press any button within the following 3 seconds. If you keep on pressing, it will restart from last value. [. . . ] The compressor may cause more noise for a short time when it is first activated. Bubbling noise and splash: Due to the flow of the refrigerant in the tubes of the system. Air blowing noise: Indicates normal operation of the system due to the circulation of air. There is a build-up of humidity inside the cooler Check if: · all food is packed properly. [. . . ]