User manual ZANUSSI ZTI6100

[. . . ] GESCHIRRSPÜLER DISHWASHER ZTI 6100 152983 87/0 GEBRAUCHSANWEISUNG INSTRUCTION BOOKLET D GB Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Protection against flooding Hints for test centres Technical specifications 28 29 29 31 31 33 34 34 36 37 38 39 40 42 42 42 43 43 43 43 44 45 45 46 46 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Building-in 47 47 48 48 49 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 27 IND29en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] Crockery and cutlery * 8. QUICK WASH 55°C 9. DELICATE 45°C WITH PREWASH Light soil. Delicate china and glassware This is a programme designed both to heat plates before serving or remove dust from dishes which have not been used for a long time. 10. PLATE WARMER * This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. 39 PRO63en Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 7a. Setting and starting the programme without "delay start" The selection of the programme occurs with the door partially opened. Press the "programme selector" push button until the required programme number appears in the digital display. To see the duration of the programme (in minutes), only with open door, press the "cancel" push button The following options may also be selected: Half load: by pressing the corresponding push button Eco drying/no drying by pressing the corresponding push button. Close the door, the programme will start automatically and an audible signal advises you of this. The display will show the running time of the programme. 2. Press the On/Off push button The display will show the last selected programme (if with the last programme options have been selected the corresponding indicator lights will illuminate). 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary. ab- 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. 5. Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser. If the half load option is selected remember to reduce the quantity of detergent. 6. 40 SEQ34en 7b. Setting and starting the programme with "delay start" Once a programme and required options have been selected (see point 7a. ) to use DELAY proceed as follows: Press the DELAY push button. The digital display will show "h 0". If other options have been selected the corresponding indicator lights will turn off, but this will not modify the settings made previously. Press the button again to select the number of hours by which you wish to delay the programme start (up to a maximum of 12 hours). To set the time setting to zero press the DELAY push button until "h 0" appears in the digital display. Close the door, an audible signal will confirm the starting of the countdown. The digital display shows the delay time, which will decrease with steps of 1 hour. [. . . ] It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. The recess height may be anywhere between 820 and 900 mm from the floor as the dishwasher incorporates adjustable feet (max 80 mm). A distance of 2 mm should be allowed between the top of the dishwasher and the counter top. + II89 596 818 ÷ 898 0 5 55 x ma 600 Adjusting the height of the appliance To adjust the height proceed as follows: 1. [. . . ]