User manual ZANUSSI ZTK123

[. . . ] User Manual Tumble Dryer ZTK123 Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. The symbols you will see on some paragraphs of this booklet have the following meaning: The warning triangle emphasize information that is particularly important for your safety or correct functioning of the appliance. The information marked with this symbol provides additional instructions and practical tips on the use ofthe appliance. [. . . ] · End of programme light This light is on at the end of the cooling phase, during the anticreasing phase and at the end of the programme. · Water reservoir full light This light indicates that the appliance is in the drying phase. This light comes on at the end of the programme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes. This light comes on also when the water reservoir is not inserted correctly. · Filter cleaning This light illuminates at the end of the programme to remind you that the filters must be cleaned. · Condenser cleaning It comes on every 80 cycles to remind you that the condenser must be cleaned. Cancelling a programme Turn the selector dial to "O" to cancel a programme which is running. Now you can select a new programme. At the end of the programme If the laundry is not removed at the end of the cycle, the dryer performs an anticreasing phase (duration: 30 minutes maximum). If you do not remove the laundry, the dryer will stop automatically at the end of the anticreasing phase. Lights End/Anticrease , and remain lit and the buzzer sounds for 2 minutes. Turn the programme selector dial to "O" to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. Turn the time selector dial to "O"; all the lights go out. If you open and then close the door before turning the selector 11 dial to "O" all the lights corresponding to the phases making up the performed programme come on. After each use · Clean the filters. Modifying the programme To change a programme which is running, first cancel it by turning the programme selector dial to "O". Select the new programme and press the Start button. 12 Care and cleaning Important: You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. External cleaning Use only soap and water and then dry thoroughly. Important: do not use methylated spirit, diluents or similar products. P1110 The filter in the inner door must be removed for cleaning. 1000 / 1200 Cleaning the door Clean periodically the interior part of the door to remove any fluff from the seals around the filter. [. . . ] Positioning It is recommended that, for your convenience, the machine is positioned close to your washing machine. The tumble dryer must be installed in a clean place, where dirt does not build up. Air must be able to circulate freely all round the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine. [. . . ]