User manual ZANUSSI ZU9100F

[. . . ] FREEZER ZU 9100 F INSTRUCTION BOOKLET 2222740-41 CONTENTS Instructions for the User Important Safety Instructions Description of the Appliance Operation Before use Freezer controls Starting your appliance Temperature control Warning light (red) Temperature acoustic alarm Open door acoustic alarm Freezing fresh food Frozen food storage Internal thermometer Thawing Ice making Instructions for the Installer 3 4 4 4 4 5 5 5 5 5 5 5 6 6 6 Technical specifications Installation Positioning 12 12 12 Electrical Connection Building-in instructions Door Reversal Building the appliance in under a worktop Fitting the plinth 13 14 14 16 19 Health and safety guidelines Defrosting Maintenance and Cleaning Internal cleaning Periodic cleaning When the appliance is not in use 6 7 8 8 8 8 Something not Working?Service and Spare Parts Customer Care Department Guarantee Conditions 9 10 10 11 2 IMPORTANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement. Prior to Installation s During Use s Check the appliance for transport damage. [. . . ] The following tips should help you to ensure that the food in your home is in as perfect condition as possible. s Keep the freezer door closed as much as possible. Do not push food together too much, try to allow air to circulate around each item. Cool cooked food as quickly as possible but do NOT place in the freezer until cool. (Leave food in a place as cool as possible in order that it can then be placed in the refrigerator as soon as possible). The best way to defrost food is to put it in the refrigerator to thaw slowly. Ensure that food placed in the freezer is dated and labelled and used in date order to ensure that food is consumed at its best. It is important that food is used before its "best before" date. Always wash your hands with soapy water and dry them with a clean towel before handling food. Keep work surfaces clean and avoid cross contamination by not using the same work surface or knife, without washing them thoroughly in between. The foods to be frozen must be fresh and of the best quality. 6 s s The size of each pack should be small enough to ensure that it is used in one go. Small packs freeze more quickly and uniformly and give better results. Frozen food, once thawed, must not be refrozen. Lean food keeps better and longer than fatty food, salt reduces the storage time. Wrap the food in polythene or aluminium freezing bags or foil so that they adhere to the food and provide an airtight seal. Packaging which is swollen or has traces of refrozen water droplets on the pack could indicate that the product has not been kept at a suitable temperature and that it may have lost its original quality. Partially thawed food must not be refrozen, it must be consumed within 24 hours. Never exceed the storage time indicated. Never place hot food, bottles or cans of fizzy drink in the freezer as they may explode. Large Pieces of Meat: can be re-frozen providing there are still ice crystals remaining within them. Small Joints: should be cooked and can then be re-frozen as cooked dishes. Chicken: should also be cooked and refrozen as a cooked dish. 7 MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. [. . . ] Directive: - 73/23 EEC of 19. 2. 73 (Low Voltage Directive) and subsequent amendments. - 89/336 EEC of 3. 5. 89 (Electromagnetic - Compatibility Directive) and subsequent amendments. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of breakdown. Important The wires in the mains lead are coloured in accordance with the following code: Green and Yellow Blue Brown - Earth - Neutral - Live GREEN & YELLOW 13 AMP. FUSE If you fit your own plug, the colours of the wires in the mains lead of your appliance, may not correspond with the markings identifying the terminals in your plug, proceed as follows: Connect the Green and the Yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol , or coloured green and yellow. [. . . ]