User manual ZANUSSI ZV130T

[. . . ] Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer. in the refrigerator or freezer. Maintenance and Cleaning Before cleaning, always switch off the apppliance When unplugging always pull the plug from the mains socket, do not pull on the cable and disconnect from the electrical supply Installation This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. Ensure that the appliance does not stand on the electrical supply cable. [. . . ] When using a microwave oven to thaw foodstuffs, follow the manufacturer's instructions. 6 Zanussi 818 15 02- 00/9 - Cabinet interior Freezer drawers The freezer drawers make it easy to quickly and easily find the food package you want. To gain space, the drawers can be removed and the products can be put directly on the shelves. On all shelves, except the top shelf, it is possible to place products that protrude 20 mm from the front edge. This allows maximum use of the available space. It is required to assure proper air circulation. Release the ice cubes by twisting the ice tray. If ice cubes are kept for a long time, they will dry out and the taste is affected. Thus, throw away old ice cubes and prepare new ones when needed. Removeable shelf There is a middle shelf inside the freezer. Remove the shelf when large food products need to be frozen. 7 Zanussi 818 15 02- 00/9 - Hints and Tips Energy Saving Advice Do not install the cabinet close to sources of heat such as a cooker, dishwasher or radiator. Locate the appliance in a cool well ventilated room and make sure that the air openings of the cabinet are not obstructed. When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise from the compressor. A thermostat controls the compressor and you will hear a faint "click" when the termostat cuts in and out. Food Storage Avoid buying frozen food if you can not store it straight away. The use of an isulated container is advisable. When you arrive home place the Maintenance and Cleaning Before any maintenance or cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY supply GB Removing the ventilation grille The ventilation grille can be removed, e. g. When all the ice has melted, clean and wipe the cabinet dry, then push the drain spout back in place. Switch on the cabinet and replace the frozen foodstuff. Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric appliance making it live. 9 Zanussi 818 15 02- 00/9 - To Change the Light Bulb The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet. To replace the lamp in the chiller compartment (only cabinets with two doors), first unscrew the lamp grille with a screwdriver. Use a bulb of the same type, E14 socket, maximum rating of 25 W. When the appliance is not in use Discconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells. Something Not Working Before contacting your local Service Force Centre check the following points: Sympton The temperature is too high inside the freezer. Solution Set a lower temperature. [. . . ] Notify the dealer immediately of any damage. Do not allow children to play with the packaging. The plastic film can cause suffocation. GB Cleaning Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth. Installing the cabinet To otain the best performance from the cabinet, ensure : the cabinet is placed in a dry, cool place and is not exposed to direct sunlight. the cabinet is not placed close to a source of heat, e. g. [. . . ]