User manual ZANUSSI ZWF12370W

[. . . ] User manual Washing Machine ZWF 12370 W Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Content Safety information - - - - - - - - - - - - - - - - - - -3 Description of the appliance - - - - - - - - - - - -5 Detergent dispenser drawer - - - - - - - - - - - -5 Control panel and functions - - - - - - - - - - - -6 Programme table - - - - - - - - - - - - - - - - - - -7 Programme information - - - - - - - - - - - - - - -9 Washing Hints - - - - - - - - - - - - - - - - - - - - -10 Before the first use - - - - - - - - - - - - - - - - -13 Operating Sequence - - - - - - - - - - - - - - - -14 Care and cleaning - - - - - - - - - - - - - - - - - -18 Something not working - - - - - - - - - - - - - - 21 Technical data- - - - - - - - - - - - - - - - - - - - - 24 Consumption values - - - - - - - - - - - - - - - - 25 Installation instruction - - - - - - - - - - - - - - - 26 Environmental concerns - - - - - - - - - - - - - 30 2 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. [. . . ] The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again. You must select this option after you have set the programme and before you press the button 6 . 16 Operating sequence When the programme has finished, the «End» pilot light illuminates and at the same time the light of the button 6 goes off. If there is water left in the tub, the «Door» light illuminates: the door remains locked. The «Door» pilot light indicates if the door can be opened: · light on: the door cannot be opened. The appliance is operating or there is water left in the tub. If the door is locked do not try to open it!· light off: the door can be opened. · flashing light: the door is opening. Altering an option or a running programme It is possible to change a few options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing the button 6. Changing a running programme is possible only by resetting it. Turn the programme selector dial to «Off» and then to the new programme position. Start the new programme by pressing the button 6 again. The washing water in the tub will not be emptied out. Interrupting a programme Press the button 6 to interrupt a programme which is running, the corresponding light starts to flash. Press this button again to restart the programme. Cancelling a programme Turn the selector dial to Off to cancel a programme which is running. Opening the door after the programme has started First set the machine to pause by pressing the button 6 . If the «Door» light flashes after a few minutes the door can be opened. If this light remains lit, this means that the machine is already heating or that the water level is too high. In this case the door can not be opened. [. . . ] Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance's rating plate. Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used. [. . . ]