User manual ZANUSSI ZWH5105

[. . . ] General information and tips Environmental information Content Safety information - - - - - - - - - - - - - - - - - - -3 Description of the appliance - - - - - - - - - - - -5 Detergent dispenser drawer - - - - - - - - - - - -5 Control panel and functions - - - - - - - - - - - -6 Programme table - - - - - - - - - - - - - - - - - -7-8 Washing Hints - - - - - - - - - - - - - - - - - - - - -9 Before the first use - - - - - - - - - - - - - - - - -11 Operating Sequence - - - - - - - - - - - - - - - -12 Care and cleaning - - - - - - - - - - - - - - - - - -16 Something not working - - - - - - - - - - - - - - 18 Technical data- - - - - - - - - - - - - - - - - - - - - 21 Consumption values - - - - - - - - - - - - - - - - 22 Installation instruction - - - - - - - - - - - - - - - 23 Environmental concerns - - - - - - - - - - - - - 26 2 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Always unplug the appliance and turn off the water supply after use, clean and maintenance. Under no circumstances should you attempt to repair the machine yourself. [. . . ] DESCARGA FIN PREWASH/ WASH RINSES SPIN DRAIN END By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on. «PRELAVADO / LAVADO» (Prewash/wash) When this light comes on this means that the machine is performing the washing phase. If you have selected the PRELAVADO (Prewash) option, this light will be on during the prewash phase too. «ACLARADOS» light = rinses phase «CENTRIF. » = spin phase «DESCARGA» = drain phase FIN = end of programme At the end of the programme the pilot light FIN illuminates. The «FIN» (End) light flashes in the event of operating problems: 4 flashes: door open 2 flashes: problem with water draining 1 flash: problem with water supply For more information see paragraph "Something not working"?Altering an option or a running programme It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the «INICIO/PAUSA» (Start/Pause) button. The «Door locked» light on the pothole illuminates to indicate that the appliance starts operating and the door is locked. If this light is on: the door cannot be opened. If this light is off: the door can be opened. The washing programme has finished. 14 Changing a running programme is possible only by resetting it. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. Maintenance Wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: The drum should be empty of laundry. Select the hottest cotton wash programme. Use a normal measure of detergent, must be a powder with biological properties. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The washing powder and additive dispenser drawer should be cleaned regularly. [. . . ] This could be done by tying it to the tap with a piece of string or attaching it to the wall. Water inlet An inlet hose is supplied and can been found inside the machine drum. Do not use the hose from your previous machine to connect to the water supply. Open the porthole and extract the inlet hose. 2. Connect the hose with the angled connection to the machine. 45° Attention! [. . . ]