User manual ZENEC ZE-NC4110 FOR SANTA FE

[. . . ] The instruction manual contains important information and warnings about the operation of this unit. Please store it inside your vehicle to have access to it any time. nOTE: Text passages with this symbol indicate particular information, which is very important for correct operation. This unit is designed to be used in a vehicle with a 12V battery and negative ground. [. . . ] To unlock the unit with the super code, it's inevitable to send it back to an authorized ZENEC-dealer. If you want to change or deactivate the anti-theft code, you must enter a valid code rst. Always proceed according to the accompanying update guide. The TP button lights up orange when the radio station provides traffic announcements. The TA button lights up orange when a traffic announcement is transmitted. When AF and Region are activated, auto tuning to those stations within the region is assigned. When AF is activated and region is deactivated, auto tuning attempts to nd stations without any region boundary. When AF is activated and a radio signal is too weak, the tuner automatically switches to the best available frequency. When TA is activated, the unit will auto seek an available TP or TA station. When TA is activated and a traffic announcement is received, the current playing source is overridden by the traffic announcement automatically, if the tuner was last set to the FM band but not, if it was last set to the AM band. When traffic announcement is over, the current playing source will be resumed. Touch to enter the PTY menu, then touch to select a choice in the PTY menu. The unit will auto seek the next available PTY by increasing tuning frequency until the program type matches the PTY, if no match is found, the tuner will return to original radio and "None" is displayed. Touch to switch between the two submenus. Preset radio stations: Touch to recall preset stations or touch and hold to store a station, (total 6 stations for each band). Displays whether mono or stereo sound is playing. The unit automatically switches between mono and stereo, depending on the reception quality of the radio station. Touch to change among the following bands: FM-1, FM-2, FM-3, AM-1, AM-2. This product features a tuner with RDS function. To use the RDS features, the AF function needs to be enabled. Please make sure to activate the AF function if you want to use RDS. Touch the lower section of the screen to display these icons. [. . . ] Use a dry, soft cloth to wipe the disc from center to edge. New discs may have some rough spots around the inner and outer edges. If such a disc is used, remove these rough spots with a pencil or ball-point pen. This item incorporates copy protection technology that is protected by U. [. . . ]